• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Order by relevance
  1. 69_A12_6BBL

    Bulkhead connectors orientation on schematic

    The connectors are shown UNplugged and connectors facing viewer (so to speak), one has to look at the picture in a way that says "Ok so when I plug this together, J is Top Left and N is bottom right" Once you have the COLORS associated in mind it'll make sense. Personally I have to think...
  3. F4R/T

    Painting Engine bay...Primer or sealer ?

    Strip it, and clean it good and use the best materials you can afford and get. Just remember you don’t want to do it again. I’m currently doing my engine bay on my 68. It was born white, then got a bad black coat over the car, then two different shades of red... but no rust!!!! So I can handle...
  4. dadsbee

    1968 B Body Inner Fender Splash Shields

    Drivers side can only go on the outside! Holes in the frame to install the push clips into. Passenger side rail doesn't have any frame rail holes, as it goes inside..
  5. Jerry Hall

    1968 B Body Inner Fender Splash Shields

    I have always installed both on the inside of the fender well. I believe that's the way they were on the all original 70 V code RR, but that was over 20 years ago. Funny how I remember crap like this and can't tell you all I did yesterday.
  6. 69_A12_6BBL

    Electrical issues? NOW WITH PICTURES AND INFO

    Find the reproduction M&H Front Light harness from Year One, (I can help you locate if theyre outta stock I once worked with M&H), and you'll be complete! Sounds like a dead short to ground.
  8. 69_A12_6BBL

    Ammeter wires question

    Replace the dash harness & be finally DONE. No Voltmeter crap needed
  9. dadsbee

    1968 B Body Inner Fender Splash Shields

    Outside drivers side, passenger side has been know to be on either side. My '66 is inside, as well as '69 and '70.
  10. 69_A12_6BBL

    Ammeter bypass (or whatever you call it)

  11. Tex013

    Its getting tough out there

    Doug , it does fade a little in competition Tex
  12. 69_A12_6BBL

    Ammeter bypass (or whatever you call it)

    Just replace the Dash & engine harnesses with M&H and leave everything 100% OEM. Problem solved.
  14. MarPar

    Name that cartoon character

    Isn't that the model of Rog's van? @kiwigtx
  15. Big bill

    FOR SALE 66/67 Dodge coronet blower switch.

    .
  16. Big bill

    FOR SALE 66 and up V8 K frame .

    Bump
  17. Big bill

    FOR SALE Vintage Fram PCV 62-69 kit

    Bump
  18. Big bill

    FOR SALE 66/67 B body strut rods.

    Bump
  20. Loulang

    Rear sway bar?

    Found out I’m gonna have to figure something else out for my front sway bars. My car had calipers that are in the front of the spindle so my caliper hits it if I was to install it. Did all that work cutting off the ones off parts car and cleaning them and painting them to find out won’t work in...
  21. Hey-O

    Are you a narcissist?

    You're back, what does that say about your aversion or problem. Yes, I'm your Huckleberry, but To be honest, this is a show, not a thread and you bore me. If I need help, I know where to get it. As for you, stick to giving advice on how to change oil, that might fit you better. I'm done here.
  22. Charles Cook

    What does the backward R stand for VIN fender tag

  23. Charles Cook

    What does the backward R stand for VIN fender tag

    My 68 has the R
  24. bearman

    Are you a narcissist?

    Mine comes from being the boss all my life
Back
Top