Search results for query: *

Don't forget the friction modifier for that sure-grip. Some brands claim to have it already blended in but I wouldn't trust that they take in to consideration, requirements for older differentials. It won't hurt to add an ounce or two.

That’s another issue I’m having. I had it tuned with the vacuum gauge and tried to adjust the timing, etc. and had it idling in Park at 950. I tightened everything down and had it set right, next time I start it, after the electrical choke kicks off now it’s at 2100 rpm after the chrome kicks...

What is the idle speed? Sounds really high.

Still several left!

Thanks SPD - Scheduled Production Date Bottom line on the fender tag 3 digit group to the left of the far right 6 digit group First number (1 to 9) = Month Jan to Sep A = Oct B = Nov C = Dec Next two digits = day of the month Quality control was something to behold back then. Your work is...

Ot to mention that it’s totally illegal to do that. I know I know lots of ppl do it. Kim

I don't think so. I had a later water pump housing and was able to fit the Saginaw P/S pump to it, then I switched to an aluminum WP housing with the hose nipple on the driver's side. It fit that one just fine and the alignment was identical. I have a good sized stash of pulleys but very few of...

skip bombing (on the deck) for those that want to know WWII Pioneers of Skip Bombing

Take your pulleys off. Set face down. Measure the height. Report back with your findings. W/p is 2.75 inch deep. Double bottom is 3 inch deep. I bet u have 69 and older small block pulleys. Kim

Still looking RT side rear patch panel. Looks like they stop making re-pops. I may have to hand form .... but what a pain.

HA !, The heck it is...The DOT 5 I use is $40 a quart!

.

Great job with the troubleshooting.

Could be the needle bearings in the back of the input shaft. Main shaft spins in them in all gears but 4th. I agree with the others. Rebuild time. Bearings and syncros. Not terribly expensive if gears are ok. Not hard if you have access to a hydraulic press. Way simpler than an automatic

This shifter handle will need to be rechromed for a show car. Threads are good. Shifter mechanism works as it should. Located in Baton Rouge, LA and I'll bring to the USS Alabama Mopar Show and Swap Meet on April 27th. $600 + shipping

sent you two p.m.

J Ashley M Hagan D Glenn G Herrera Good luck guys

You have the car AND the girl?

Nope. A friend tho.

:usflag: