Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is a 305-DD Ball Bearing. It is brand new in the box.
I've been told it's for the input shaft on a A833 4 speed
trans, but I'm not positive, so do your home work before
buying. $15.00. Local pickup, or buyer pays shipping.
Are we having the same problem here that we have with fuel sending units? I removed my solid state IVR because of something that I read on some thread. My fuel gauge was very slow to react, so I put my old IVR back in, bam, fuel is normal again. I had to replace my circuit boards and...
Welcome to FBBO from NorCal Sierras
you should also become a FBBO sponsor/contributor
maybe also you could join & get/buy a Gold Membership too
what no 1968 mid-size 5 (the best IMO) to 1969
or all the other years, from 1963-69 or even 1971 :poke:
@OverDrive 'by the way', for your knowledge...
Don't know where it might have been stored before I bought it. I saw it on ebay and I ended up being the highest bidder. It hadn't met the reserve so I contacted the seller and worked out some numbers that we both agreed on.
He stated that he was about to part it out but his friend talked him...
Nice looking car, I would say $20-23K but thats from just looking at pics. Since you have some sentimental value with it, Id say offer $22.5 but be prepared to pay the $25
If you are always driving a car mildly, even a high performance model, you probably won't see any benefit from reinforcements.
I agree, this is a modification for those that do push their cars beyond casual cruising.
I agree its a very subjective subject! Im not denying you like the way they feel. Im just surprised that so many people say they make that much difference.
I can’t install them on my ride due to inference with the exhaust. So I may not ever know the difference. I have considered the...
TTI's are magic. I couldn't believe putting in those headers and how easy it was, it was almost baffling after struggling with Hookers. Even 3" exhaust I assumed would hit somewhere, it was perfect! Actually, I think I had to hang the kick down cable upside down or something like that? That was...
I can bolt doors on a car with the USCT connectors while hanging on my rotisserie (connectors installed before rotisserie); and nothing changes when I take the car off of the rotisserie
I don't see the CB method to add much, if anything. You'd have to test the various methods on a chassis table like XV Motorsports had some 20 years ago. It measured torsional resistance and allowed them to data-log it.
Yes, the rocker panels do act like a frame rail but they are spaced far...
I know early Mopar's are popular in Europe. Always thought it would be incredibly challenging to source parts for these. Do you use local sources are do you source from the U.S. and have them shipped? Also read an article a few years ago regarding auto exports specifically classic cars from...