Search results for query: *

Hi FBBO Today on a car show I discovered a very suspicious ride 19xx body 1969 grille and taillights 1968 side markers Non matching Vin tag It can be the cleanest 4 to 2-door conversion I‘ve ever seen or the worst choice of a „replacement“ vin tag Sadly I didn’t met the owner he was gone...

Hi FBBO I want to get rid of something and I need help. A lot of you guys are in older age so you collected more experiences than me with 21. I try to make it short: A few weeks ago I met a girl on a dating platform and we understood each other pretty good. At first it was nothing serious...

I recently scrolled through a few mopar pics on instagram and saw some of them have chromed out edges on the pedals. Was that a trim option back in the day or are they just custom? My car and everyone I know have all black brake and acceleration pedals. Never noticed them till now.

Hi I ordered these window seals from rockauto. They seal perfectly but when it comes to roll the window down I have to crank it so hard that I‘d rip all the internal linkages apart. I already lubricated them (pics older) but sadly no solution. Anyone had this before?

Hi Members I have a problem with my speedometer. At higher speed between 30-90mph it’s very accurate and works fine. But when I take off it bounces between 0-25mph as long as I get to a decent speed. I already installed a new cable and lubricated all mechanical plastic pieces inside. It wasn’t...

Hi FBBO, is there a fast cheap way to make my defrost working? I have a former AC car (69‘ Satellite) pervious owner ripped out all the AC components. There are only the heater box and the heater control valve left. Dash vents work. Haven’t found a conversion video or useful tips yet. How can I...

Hi, I finished my rear end upgrade today with a spartan locker (8.25). Installed it just like in every YouTube video I have found. Just came from my test drive and I noticed a constantly clicking sound when cornering. At a straight line it’s quiet. I didn’t dare a burnout yet to see if both...

Hi FBBO I‘m installing a spartan locker in my 8.25 rear end. If I put the shim (like it was stock) between the inner differential housing and the outer component of the locker the isn’t enough space to get the last middle piece in. Without the shims it fits perfect. Do I need them with an...

Help! I‘m about to burn that piece of crap to the ground. I removed the right drum brake cover easily by turning the star screw. Drivers side is completely stuck and the screw is worn from 2 hours of unsuccessful trying. I read that one must be tuned from the bottom up but it makes no sense...

Hi members I need to adjust the axle play on my 8.25 rear end. I saw a video of a 8.75 where it was adjusted by a disc nut on the thread. Does it work the same way on a 8.25? Thanks

I need to lower my exhaust gas emissions (HC value) otherwise I‘ll not be able to get a registration for my car in my country. I know its not a big deal in the US but here it is. My HC value is way too high to be exactly it‘s 3x above the standard here. I have a spicy cam in my motor so there‘s...

Hi The last couple days I thought to myself if there are any young people out there driving these beautiful old machines. On every car show or some random car on the street they‘re nearly always owned by people in their 40s to 70s Just wondering am I the youngest member here? Born in June...

Hi, do someone know where I can find the gaskets for the stock Ranco heater control valve? I already searched summit racing, classic industries and rockauto. Nothing in sight. Or is it possible to cut them byself out of rubber or something?

Took my car on a test drive today and I realized when I turn far right at a certain position my wheel stops turning. Have to use a lot of strength to continue steering looks like something stuck inside? It’s making a knock noise when turned over. I have a new steering box, turn signal switch...

Wanted to install the new tail shaft seal on my transmission. Unfortunately I slipped a few times while hammering it. Going to try it again tomorrow. Is it still usable without leaking like crazy? Thanks

Hi FBBO! I currently replace all my suspension bushings and when I came to the bump stop at the lower control arm there is a problem to remove the bolt. It‘s sitting in there with it‘s right side all the way to the control arm wall. So I can‘t reach it with a nut or wrench. Is this normal? How...

Hi, I installed a carb spacer and after putting all together I realized my kickdown is kinda bad. It shifts down but there comes no power when the motor screams crazy at 6000rpm. I have a Holley 4-barrel 4160 on a 350hp 318 block The angle of the linkage changed of course because the carb sits...

Hi members, Maybe I can find some useful tips here- first things first: Soon I‘ll get my car registered. I was at a shop couple weeks ago and they told me one of my two main problems are the too noisy exhaust. Here in my country it’s allowed to have 98 decibels at 2-3000 rpm, I need to lower it...

Hi, i need to buy new outer door locks looks like the previous owner lost the key. I found a 66-68 lock set for a good price. I know they moved the inner knob from back to the middle to prevent stealing but is the lock mechanism still the same in 1969? Thanks!

Hi guys, I installed the washer box, pump and hoses today. So far all good. After that I wanted to adjust the nozzles so the water comes to the windshield/ unfortunately the drivers side nozzle broke off by barley touching it and now it lays inside the vents…. Had some of you guys the same...