Search results for query: *

I am looking for a 1972 hood release cable or the under dash mounting bracket if it can be replaced separately. The part number for the cable is either 3695565 or 3670388 and has the horizontal handle and a loop in the cable on the under hood end. Or, if possible, instructions on how to fix the...

Needed: brackets for 1972 coolant recovery bottle part numbers 3574 172 and 3574 168. These are specific to 1972.

I am in need of ten (10) new screws for my tail lights. I tried the pan head screws with the #8 heads and the #8 heads do not fit into recessed area in the lens and stand out. The 1972 requires five (5) 2-1/2” screws for each lens, so if anyone has these on their shelf and are up to sharing or...

I am searching for this short piece of molding circled in the attached picture. Actually, I need two. The part number is 3680672 1/4 panel molding and is an extension of the door molding. these came in white and black, but I am looking for black. Please contact me if you have a pair you are not...

Asking for help or the part itself. I am looking for a source for this center-over spring pictured below for my door latch. I would like NOS but I can’t seem to find the part number in my 1972 parts catalog. I see a couple on CARID, but I’m not sure it will fit the Plymouth.

Looking for these “wafers” for my console lock so my locksmith can fix my lock. I purchased the Repo’d lock from Classic Industries and the darn thing wouldn’t latch onto the console striker, so I took the old cylinder - which had been gutted - back to the locksmith to see if the guts from the...

I am working on restoring my 1927 Plymouth SSP. I am searching for this short piece of molding circled in the attached picture below. I need two. The mopar part number is 3680672 - 1/4 panel molding - and is an extension of the door molding. These came in white and black, but I am looking for...

I am searching for this short piece of molding circled in the attached picture. Actually, I need two. The part number is 3680672 1/4 panel molding and is an extension of the door molding. these came in white and black, but I am looking for black. Please contact me if you have a pair you are not...

Needed for CA requirements as we must display plates on front and rear of vehicle - if your state doesn't require a front license plate and you're not using the bracket to display any other plates, please PM me. with a price and method of payment.

Please PM and let me know if you have one lying around. This was used on 1972 models and the one in the SSP I recently purchased had a fitting on the cap broken. I'm unable to find the canister via any of the restoration sites.

Needed to ship Elderbrock manifold and carb listed on the for sale forum. Does anyone have one lying around that they are not using or know a a good source? Trish