• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. vintagetin

    WTB '66 Charger Cigar Lighter and Trunk Lock Bezel

    Looking for some misc. '66 Charger Parts. Currently need a functional cigar lighter, and the bezel that goes between the trunk lock cylinder and the sheet metal. Let me know what you got. Maybe interested in buying other parts. thanks!
  2. vintagetin

    Detroit Area, Chrylser 440 parts wanted

    I'm looking for all the stuff hung on the front of the engine. It's a Chrysler 440. The car is actually a 'C' body, but more people check the 'B' body threads. I need a Power steering pump (later style Saginaw pump), pump brackets, alternator brackets, pulleys, hardware, etc. Maybe even the...
  3. vintagetin

    '66 Charger driver side quarter panel patch!!

    I am in desperate need of rear quarter panel patch. It's the last 16" that runs from the pot metal end trim near the bumper to about half way into the fuel door. I need the hole height of the quarter (from the aluminum trim all the way to the bottom). Just name your price. You'll probably...
  4. vintagetin

    a833 overdrive bellhousing!

    I'm looking for a bellhousing to mount to a small block chrysler with the bolt pattern and whole cut to fit an A833 overdrive transsmission. I believe it is a 123 tooth flywheel. I can double check if that's important.
  5. vintagetin

    small block water pump pulley

    A friend of mine needs a water pump pulley for his 318. Any one got one sitting around somewhere for a small block? It uses the v-belt. Thanks.
  6. vintagetin

    Need A 833 w/od

    Looking for a good, used A833 with overdrive transmission for a decent price. Must have B/E body mounting triangles. Shifting linkage and bellhousing would be nice too.
  7. vintagetin

    OD A833 w/bellhousing

    I'm looking for an a833 four speed with overdrive and all the shifting linkage, and a bellhousing that fits an LA. If not I'll just fabricate mine for the bigger front bearing retainer.
  8. vintagetin

    '66 Dodge Hood Loop needed!

    I don't need the hood latch, but I do need the small "U" loop that bolts to the hood and the latch grabs for my '66 Charger.
Back
Top