Search results for query: *

I have to pull the 727 out my 65 Coronet. Fortunately I have a lift and high trans jack, but I've never pulled a trans with a lift before. How do you support the rear of the engine? On the ground I could put a jack, blocks or whatever is around and will hold the weight. But what do I use...

I just installed a new rear end in my 65 Coronet. I have upgraded from a 2.94 open to a 3.55 Sure-Grip with new parts from Dr Diff. I went to put the driveshaft in and found that on the new yoke, which is a 29 spline, the saddles for the u-joint are farther apart that the original 10 spline...

My first rear end rebuild and first time setting up gears, and I'm not really sure what I'm looking at. I have the backlash set to .007 but I can't really see a pattern like I see in the diagrams. What do you think?

I just finished rebuilding (and upgrading) the engine and transmission on my 65 Coronet, and the last thing I need to do is the rear end. I'm switching from an open 2.94 to a 3.55 Sure Grip. I'm putting it together now and at the point I need to set the pinion depth. I used the trick to get...

Hi guys, I rebuilding my first transmission, an early (65) 727. I am to the point of putting the front clutch hub together and I'm having some trouble getting the piston in with the new seals. I'm using Carl Munroe's book and he suggests using a product called Door Ease to lube the outer...