• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 6

    572 Hemi pushrods rubbing Cometic head gasket

    Found all the exhaust pushrod rubbing severely on the head gasket. Got deep wear spots in less than 100 miles driving. I can replace the pushrod, install new head gaskets but will end up the same. How do I clearance the holes in the head gasket without wrecking them? Is this normal?
  3. 6

    What is this plug for- MP Hemi block

    What is the o-ringed big plug for at the front of the block just above the oil pump?
  4. 6

    Manual Steering Gearbox with no dead input spline?

    I just rebuilt my manual gearbox. I installed a 20:1 gear Mopar PN: P4007612. Now I go to install it and the coupler does not fit. My old gear and coupler have a dead spline, but the new 20:1 gear does not. What goes on here?
  5. 6

    Need 8-3/4 rebuild in Phoenix Az. ??

    New an 8-3/4 center section assembled with my new parts. Looking for someone in the greater Phoenix area. 65AFX
  6. 6

    Who has a hemi block they can measure?

    I need to know the width of the motor mounting pads on a 426 hemi block. That's the distance from one side of the block to the other.
Back
Top