• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. O

    Hughes rocker arms

    Does anyone know who manufacturers the rocker arms for Hughes? Their web page states " Made in the USA". I'm aware of only two that are USA made, Harland Sharp and T&D.
  3. O

    Chasing ghost

    My 493 RB developed a strange noise. Started as a faint grown and getting louder. Last week I reached my stress level and decided it was time for exploratory surgery. The engine is a 440 RB block, Indy EZ-1's, Eagle rods, Diamond pistons(10.8 cr), Eagle (4.15) crank, Comp (hyd flat tappet)...
  4. O

    Stumped

    First, a little background. I've been mechanic/building for 50+ years and never run across this. New 470 bbm. New Be Cool radiator, New 13psi cap, Be Cool overflow. New 180° t-stat, all new hoses. Compression test good. Leak-down test good. Checked for combustion fumes in radiator. None. All...
  5. O

    Push rods

    Who makes a good 3/8" cut-to-fit push rod for B/RB engines?
  6. O

    Safety bellhousing

    QuickTime or Lakewood scattershield bellhousing. Pros and cons. 1965 Belvedere w/500 inch RB. I've heard fitment issues with both. I'd like to know before I shell out $700.
  8. O

    Doing it wrong!

    It never ceases to amaze me at the length some people will go to exercise their "southern engineering" skills.
  9. O

    Trans cable adjustment

    I guess I'm having a senior moment. I worked for maw Mopar in the 60's and 70's and adjusted a ton of cable shifted 727's. But never a reverse manual valve body cable shifted trans. We always made adjustments while holding the column shifter in 1st gear. But with a reverse manual set up do I...
Back
Top