• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. E

    Rear End locks after tightening wheels

    I just experienced my wheels locking up (or close to fully locking up) after snugging-up the lug nuts. They were not over-tightened. This is a fresh rebuild of an 8-3/4" with Powr Lok, properly set-up new ring and pinion by someone who does this everyday, new seals, brakes, wheel cylinders...
  3. E

    Weiand 7503 (Poly 318)

    For those of you who have used this manifold, I'm interested in what the rear port shown was provided for. Thanks, EM
  4. E

    Best solutions and methods for cleaning (inside) rear end housings

    Hey Fellas: I'm doing a complete rebuild of the 8-3/4 rear end from my 65' Dodge. After disassembly, I swabbed out the inside of the housing multiple times similar to doing a gun barrel. While I was able to get 90% or more of the crud, the old gear lube that has set in one location all of...
  5. E

    TRW Piston #L2097F (Poly 318 +.030")

    I'm looking for the proverbial needle in the haystack. 2 years ago, I purchased a set of NOS, Poly 318 forged TRW Pistons # L2097F in +.030" oversize. I'm just now beginning to get going on my block and rough bore was just about to begin when it was discovered that one piston of the set of 8 is...
Back
Top