Search results for query: *

hello guys im looking to build a street/strip capable motor out of my rb440. its a .030 over block with a set of untouched 452's 89cc from what I have gathered online. I was running a .040 head gasket and my flat tops are .092 still in the hole at tdc. so that puts me around 8.4:1 cr...…. I am...

i currently have a 67 model 440 with late model 452 88-89cc heads. I’m hunting for compression. I recently found a set of heads in a local classics graveyard. The casting number is 2463200-3. From what I gather is is a 63’ model b/rb 383/413 head with 73.5cc chambers. Would this head be worth...

I have a 68 model 440 block and rotating assembly (Not the 6-pack setup) with a set of “untouched” 452 heads. From what I have been reading online measure out to 88-90cc,putting my motor between 8.6:1 and 9.0:1 (don’t know exactly how far the piston are in the hole). I’m wanting to get my...

i just recently when a got myself a whiplash stick for my 440. Stock lower end,452 heads and intake. 750 edlebrock, long tubes and assault racing distributor and coil. It’s a 76 model low comp block. Well to make a long story short I bought a tac for the car for the break in period. so I don’t...

i have a 69 sattelite with a 77 model low compression 440 im looking for a cam to pep the motor up for racing without having to tear into the lower end, or replace heads. i have heard a lot about the huges whiplash cam and am greatly concidering it for my application. I also spoke with comp cams...

I have a 69 satellite with a 440 bbl. At this point I think I am going insane trying to chase this problem down. I had an issue with no spark for a while I traced it to the ECM being bad. After I replace that the car has spark, compression, and plenty of fuel. I check ignition timing pickup gap...

I have recently purchased hedman headers for my 69 satellite 440. They said in the description that they require a mini starter for correct fitment. Well to make a long story short I have ordered and returned 2 different mini starter because they do not fit at all with my headers... In fact the...