• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. S

    pinion angle advice

    i have a 68 charger 383 with tko 5speed conversion from silver sport. i am trying to adjust pinion angle. i have read everything on the forum and lots on internet about it. i think i 1/2 understand it. my output shaft is 2.2 deg down and the pinion is about 2 deg down clearly not ideal ending up...
  3. S

    engine mount isolator touching block

    i put new engine mount isolators on my 383 in a 68 charger. the isolators touch the engine block with basically no clearance on both sides of engine. the mount has about a 1/4” clearance. is this typical? i have double checked proper installation and all looks good. the new isolators are the...
  4. S

    383 engine not level

    i noticed the right side of my 383 in my 68 charger appears to be slightly lower than the left side (appears to be 1/16-1/8 or so). i am looking at the k member and center link relative to the oil pan and they are not perfectly parallel. i noticed it when i hooked up the center link. i have...
Back
Top