Search results for query: *

http://www.summitracing.com/parts/ape-54053 http://www.summitracing.com/parts/aaf-all26920 both are rated for 2800-3200 stall wasn't sure if anyone has had experience with allstar converters? its a reman, im iffy about that. and also the boss hog, I have one in the car now just a much...

hey y'all, its been a while... mostly due to me workin on the 74. anyway, got the engine running (.040 over 440) 3 weeks ago for the first time. rear main seal was leaking, no biggie, tore it down replaced it with a MP one. put it all back together. and it leaks STILL!!! and no i didnt install...

I bought an 11" clutch flywheel for my '78 440 its got a 143 took ring gear. Question is, i think its wrong, ive got a cast crank, therefor its externally balanced!?!?!, the flywheel i got doesnt have a counter weight on it. Which apparently is required for cast crank blocks Any help on where...

I nd to replace the shift shaft seal on my 68 Fury 727, i tleaks like a siv. Anyway, its been a while since ive been inside a 727, in order to remove the shift shaft, do i need to drop the valve body? I cant remember its been too long. Thanks guys

Does anyone know a company that makes a mini spool for a 8 3/4 with 30 spline shafts? I no i no, i should really get a full spool and spool bearings, but i just rebuild the carrier with everything new, and 3.73's and new bearing etc. Would rather a mini spool. Plus the car that its going in...

As its titled. Wondering where everyone gets there clutch forks from. Perferably for under 100 bones. Im surprised after much research i dont find much in the aftermarket for them. Im finding "kits" with the fork, pivot and boot for 130+ . I only nd a direct replacement fork. Big block, 11"...

Im curious, What makes all the cam companys produce 1bolt cams over 3bolt? Theres a very limited selection of three bolt cams. Im in the market for a 3bolt because of the gear drive i just purchased only to realize there is a very small selection of 3bolt bump sticks What gives?

http://www.summitracing.com/parts/SUM-700000/ Has anyone used, or adapted this shifter mechanism for use in a A833???? Im asking because the correct Hurst comp/plus mechanism is a little pricey... Or does anyone have a used shift mech. They would let go cheap.? Thanks guys

Whats everyones feedback on this cam? Hows the idle? Choppy, rouch, smooth,? Looking for a 2400 to 6000 rpm cam.... Engines a 440, MP1 intake, 750 holley, 904 heads, 3000 stall, with 391 gears and a 26" tire. Hows the stree manners? Customer is lookin for a real lopey funny car idle with...

Where can i get the correct oil pan i need for my 74. Roadrunner? BB. Stock style perferred. I know its different than the first style because it needs to clear the xmember. Thanks in advance help would be awesome

Does anyone know the correct Process for converting a TF727 to Full Manual upshift/downshift, and removing/disabling the kickdown??? Instructions, Parts Lis, Vendors, anything that might help. im asking for a Buddy, ill be doing the conversion for him. just need a little guidence. Thanks in...