Search results for query: *

Help! I am by no means an electrical guru so bear with me. I have a 1969 Roadrunner, i put a new electronic ignition wiring harness on it FYI. I also used a new pre 1970 stock looking black box regulator with solid state internals. My question is regarding the proper alternator or possibly an...

Guys i am at the point where i'm installing my dash in my 66 RR. I installed all new harness's in the car including a new dash harness. The issue i have is when i connected the battery and started checking to see if everything is working it fried part of my gauge cluster PCB board when i turned...

I am installing a new reverse harness on my 69 RR w/ 4 speed manual trans. There are three connections that are supposed to plug into the bulkhead but i don't know what goes where. Can anyone help me out with this? One wire is purple, also a black wire and then two black wires going into one...

Hello, i need some help hooking up my new M&H electric ignition engine wire harness along with help on my Pertronix distributor. Its a 69 RR w/ manual trans & factory tach. I did a search but couldn't find what i needed. My electrical skills are very basic so i need some help trying to figure...

On my 69 RR build i decided to get a new dash harness from Year One as its the M&H harness that's highly recommended. The issue I'm running into is they are back ordered and they have no ETA on shipment. The closest they could guess would be November. I need to desperately get this car done and...

Does anybody have an easy to navigate under dash wiring diagram available? I have my original wiring harness i need to reinstall but the diagram in the manual is tough for a guy not used to reading them. Any help would be appreciated. Thanks! On a side note, am i better off replacing the dash...

I purchased a new ignition key cylinder and matching key set for my 69 RR as the original keys were lost. I purchased the inner key cylinder from Classic Industries. I am wondering how i get the old key cylinder out and the new one in? Has anyone ever done this and how so? Any help would be...

Hey everyone, what do you recommend for a distributor and electronic ignition box my 69 RR with a 383? The car has a 383 stroker hooked up to a 4 speed tranny. I was hoping to find something with somewhat stock appearance but with performance output. I dont mind paying for quality but i dont...

Hey all, i have a 69 RR with the factory tach. I wanted to know if the tach internals need to be updated to run an electronic ignition? I have yet to select the ignition so i have options on that end. Seems i have heard people say it can be done without and mods. If anyone has a suggestion on a...