Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello all,
The gas gauge worked in the past (though not well). Over the last 2 years I have done a lot to the car restoring it and now it is up and running almost 100%. However, the fuel gauge doesnt read at all and I have to carry a gas can for longer drives.
I checked the grounds to the...
So, finally finished up installing my built 440 and kept having issues getting it to start...anyway, it looks like a few wires going to the bulkhead connector got damaged during the install. It was reconditioned years ago and looked at again when I added A/C and addressed the...
Hello all,
I am almost ready to fire up everything, but as I install an MSD box on my 67, I am not sure what wires I need from the ballast resistor and I do not see a similar setup on the mymopar wiring diagrams I have found. It may help that my car's drivetrain had been changed to a mid/late...
After a long journey, I am trying to hook everything back up with the new engine in and it seems a few wires lost their labels (or weren't labeled at all) on the left side of the engine and I want to be sure I minimize making a mistake based on what I think I remember.
Where would I find...
Finally warming up here in New York and I'm planning to address a lot of small issues with the car, and some bigger ones, in the next few weeks.
The driving/brake/turn signal lights on my 67 RT leave a lot to be desired in the visibility department.
The lenses are clean and the bulbs...
I plan to do a full tune up soon and along with some Firecore 50 wires and installing an MSD 6AL I picked up cheap, I am also going to get an MSD Blaster coil.
However, I have no idea which cap/rotor to upgrade to as I am not 100% sure what kind of distributor I have (It appears to be a stock...
I came across a non digital msd 6420 6AL box for $45 and bought it on impulse. Since my car has plugs/wires/coil of unknown age and I was going to change them soon, was figuring I could wire in the msd and eliminate the chrome box as well. my car idles a lot and is street driven so from what I...