Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I will be up front on this matter. The problem is on my 302 ford powered duece and not my mopar but I have a mopar that should give me 1/2 credit (and I never had a chevy).
The car starts fine idles perfectly, after a minute or so it just dies, no stumble or anything. I check for spark and have...
is it possible to hook up a one wire alternator wrong. One wire to battery and one wire to ground right. New Tuff Stuff alternator will only put out 11.7 volts and the alternator is very hot in a short time. Defective, yes???
I am trying to convert a 63 Dodge 330 to LED tail lights, easy huh, NO.
Installed LED new bulbs (HELLA) and they work great. Very bright light but directional don’t flash. No problem, need a new flasher, no sweat.
I have tried 3 LED flashers including one that said it needed to be grounded but...
My starter spins over and will not engage the flywheel. It is a year old Proform starter and I have had no problems with it and don't suspect the starter is the problem. I am guessing starter relay but I have very limited electrical experience.
Is there anyway to test the relay. A remote...
Output from my 3 wire alternator when running about 2500 RPM is 13.5 volts at the alternator but only 12.5 volts at the rear mounted battery.
Do I look at voltage regulator or what direction should I go. Can you test a regulator.
Thanks in advance
Jack
I bought a water temp warning light (230 degrees) so I won't forget to turn on the electric water pump (once is it)
Now I notice after looking at the directions that it is "self grounding".
Will it work on an aluminum water pump or should I get one with a separate ground.
Thanks
Jack
I just installed a Painless 6 switch panel with rocker ignition switch and starter (old fuse box now removed). Considering I know very little about wiring I followed the directions to a tee and everything seems to working fine.
I’m not getting much of charge out of the alternator now but I...
Just about finished a Painless Switch Panel install. Down to the last with for the starter toggle. I am very challenged when it comes to wiring and have what is probably a stupid question.
Instructions say purple wire to starter. Can this wire be put where the brown wire is on the relay. If it...
I am going to install a common ground strip under the dash to clean up the mess under there.
Should I ground to frame or run to the battery in the trunk.
How far can you run and still have a good ground.