Search results for query: *

Hey all, I have a 72 charger with hideaway headlights and have screwed around with the motor a few times trying to get it to work. The motor itself in terms of winding's and operation I believe to be good; I took it to a local electric motor repair shop and had them look over it. But several...

Hey all in my 72 charger I recently had my hide away headlight motor rebuilt. Was testing it out on the car and every time i would turn on the headlight switch to test the motor the hide away headlight relay(what i came to conclude the noise was coming from) would start to buzz and make the...

My 72 charger has been having an issue when I have all the lights on in the car the turn signal when activated blinks extremely slow as if the car isnt getting enough juice. When you rev the car it blinks a little faster but not as fast as when the lights arnt on. Figuring there is an electrical...

Just got my dome light installed. I only have one door switch that came with the car and it is installed and wired on the passengers side. when i went to do the drivers side there were different wires than the passengers. I don't have a switch anyways but im wondering if there is a different...

When turning the lights on my 72 charger the headlights are the only thing that will turn on. None of the sidemarkers or taillights will turn on when they are turned on only the headlights. Check ground at the radiator brace its good. Any ideas?

While trouble shooting backfire through the carb on my 72 charger with a 69 383 we check voltage off the battery and found it to be at 18 volts after the motor warms up. Had a new regulator when we found this out but bought a new one and installed anyways just to check same thing. Regulator is...

Been trying to trouble shoot the electrical nightmare that came with the car when we bought it. Finally got to the point where we could see if the motor would turn over and with the turn of the key nothing happened but a slight clicking noise from this relay(see picture). Not sure what it is for...

Need to know how I can wire up the electric choke for a holly 600 on a 1972 charger that was originally a 318 small block. The carb is new but im unsure how to hook up the electric choke. Has the original wiring harness minus a few mods for a big block setup. Ie the coil wire in front.