• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 1971RR

    Can someone explain this please?

    My motor is stock so I set the initial timing at the recommened 2 1/2* BTC. I've read some of these posts where people are setting the initial timing at 15*-18*. My car does not seem to like that. Am I understanding properly what you guys are saying? With vacuum advance unplugged, car at idle...
  3. 1971RR

    Help with run/start. Ignition? Fuel?

    I'm on my phone so I'll try and keep this short. 70 model 383. New Mallory Unilite 4757701, coil, wires, ballast and power filter (goes between distributor and coil/ballast/ground connector). Distributor red wire to ballast left terminal (facing the engine) with single wire. Green, negative...
  4. 1971RR

    Mechanical or Vacuum Advance. Which one?

    I have a 1971 RR Clone. Current setup is 383, probably close to stock build, 727 and a 2.76 rear 8-1/4. I have been have a Mallory Unilite, 3757701 and an Edlebrock 1406. Now, when I installed the new Edelbrock and took her for a spin, she ran great. Pulled past 5K RPM with no problems. I...
  5. 1971RR

    Help with distributor and hard start

    Ok heres the deal. My last year I pulled my 71 SSP/RR out of a 19 year hibernation. Got her all up and running. Due to some fuel system issues, I replaced the Carter AFB with an Edlebrock 1406 on Saturday. Car started as soon as the gas hit the carb, went into high-idle, sounded good, ran...
Back
Top