• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. E

    I need ......a rear end housing!

    I need a Mopar 8 3/4 rear end housing, for my 70 coronet. Mine is toast! Anyone have one laying around?
  3. E

    Anyone know?

    On the front of the K-Member of my 70 R/T Coronet is a oval metal plate welded on the front of it. It has the number "79" on it. Anyone know what it is for?
  4. E

    Tuning Help

    Anybody in Central Florida that I can call to talk about my stubborn 440 that won't tune? If so, please PM me with a number to call or I will give you mine. I really need some help here.... Thanx.
  5. E

    Dana 60 Search

    I am putting out a feeler for a Dana 60 rear end for a 1970 dodge coronet. My fender tag says I should have a 4:10 posi Dana 60, but there is a posi 8" 3/4 rear end in it now. Is there anyone in the vicinty of Florida that has one for sale? If so please let me know.... Thanx.
  6. E

    Educate me please!

    What are the codes on the radiator support and the trunk lip, and WHERE are these codes? Thanx. I am trying to see if my 1970 Coronet R/T is the real deal!
  8. E

    Power Steering Box Adjustment ! Help!

    Greetings, I just put a new power steering box in my 70 Coronet R/T. The problem is that when I started it up (while on jacks) the wheels slowly went to the right! I need to know how to adjust this box to stop that wheel turning, without screwing up the steering box! Please reply! you...
  9. E

    Ignition Timing on a 440!

    I need to know what you guys time your 440's with a bumpy cam to. I am using a Mother Thumper with 290 degrees of duration. Stock Exhaust manifolds, Dual plane intake, Std HEI Mopar ignition, Holley 750 carb with vacumn secondaries. Please let me know...... Thanx!
  10. E

    Intake Manifold Help!

    Greetings! I took the Edelbrock Performer off of my 440 to install a camshaft, and now it won't go back on! It seems to be off a little. Question is how do you get it back on? It seems to need tweaking, but how? Any sure fire ways?
  11. E

    Cam Install Question! Help!

    Greetings! I am swapping out a cam in a 440. I have pulled the distributor, and I found that I have to move the oil pump drive as well. Question is how do you do this without alot of hassle? I am only swapping cam and lifters. I have the front of the motor off and the top too. Please...
  12. E

    where is the temp sender?

    Hey Guys, Where IS the water temperature sending unit on a 440 ? I can't find it!
  14. E

    915 cylinder heads....

    I just got a look at my cylinder heads and found they are "915"'s...... Are these any good? what are your opinions?
  15. E

    Brown lights?

    How come the lights on my 70 Coronet R/T are dull brown when they are turned on and the engine is running? Same for the wipers, they run slow! How can I brighten up my car?
  16. E

    Steering Column Too Long?

    I need to know how to do the trick with a 1970 Manual steering column where you can shorten it for power steering by breaking a pin inside the column that allows it to collapse slightly. Anybody know how? Any other work arounds? Thanx.
  17. E

    Help! I need a power steering control valve!

    Anyone know where I can find the control valve for a power steering box on a 1970 Coronet? I bought a power steering box but it came without the control valve, where the low pressure side fitting is. I am converting from manual to power steering.
  18. E

    Fender Tag Decode

    I just bought this car, what do these fender tag codes say? 18103 17271 115 084 G70 26 C16 M46 EF8 V88 EF8 D6X9 TX9 B21 045769 D32 WS 23 UOA XXXXXX
  20. E

    Will a 69 Coronet Bumper fit a 70?

    Will a 1969 coronet rear bumper fit a 1970 coronet?
Back
Top