Search results for query: *

I know this is a B body forum but I figured you Mopar mech heads know what the usual hard to find or easy to go through parts are. Saw a 71 Valiant at my local salvage yard, I didn't have time to pop the hood so I don't know the engine/transmission specs. Off the top of your Mopar head, what...

Neither Orileys nor Autozone have a fuel level sending unit for a 74 charger but they have like 10 different options for a 73 and below. What gives??? To make things even more confusing, I go check out Classic Industries and they have sending units for a 74 B body but it's listed with with a...

I bought this kit after seeing the review of a fellow 74 charger guy state that it was an easy install. After going through the FSM it appears you need to remove or disconnect just about everything up front + the kitchen sink to get this procedure done. I've read horror stories of the rusty...

Hello, I have a 74 Charger w/an LA360 and an inop speed control servo. It appears the previous owner removed and capped the vacuum line coming out of the servo, and the inlet/outlet on the check valve mounted on the brake booster. From looking at the FSM I can tell how things are routed up...

I had to pry out the old bulb with some WD40, plyers and a flathead. I cleaned the socket housing real good and now my front turn signal works! I think I damaged the socket though because the bulb shines ultra bright. When my parking lights are on and I activate my turn signal/hazards one...

Now that I have your attention fellow 71-74 Mopers... I can't seem to find a good picture of an oil pressure sending unit, fully connected. You don't really have to provide a pic. Just let me know if you have any wiring going into it, how many wires, color, where it attaches (nipple part?) etc...

I'm chasing some electrical gremlins for a non functioning set of turn signals. My first stop is the fusebox but I can't tell what fuse belongs to what to really give it a good once over. I even have the OEM manual (zip file) opened up to page 8-114 where it explains the cavity lableling. I...