• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. pedal2themetal

    Carb selection help

    HI Al another stupid question.. I have a mostly stock 318 LA... except for a slight cam up grade to a .440 IN, EX..freshened up Stock 3 speed auto. car is my 75 Fury, 2 door hard top (I think, no window post). true duels out the back. I did clean up and gasket match the exhaust side of the...
  3. pedal2themetal

    Looking for Cam type/size opinions and help

    HI, Getting tired of being whoop on by the 4 bangers and wanting a little more attitude. What I have is 75 Fury, 318 LA. 30,000 miles on stock bottom end rebuild, True duels exhaust, stock heads. I have a lifter starting to leak down causing an occasional tick, so I'm going to change it out this...
  4. pedal2themetal

    Setting Timing by vacuum :)

    HI, I saw a post a while back about timing by vacuum.. so I thought I'd try it today..I was running 17 HG of vacuum. Using a vacuum gauge I turned it up to max i could receive and it moved up to 18 Hg. max . Well it runs better starts better .. Not really sure it I got anymore power out of it...
  5. pedal2themetal

    HI, looking for some rear gears help

    HI all, I have a 75 fury with 318. Looking to have the heads reworked with bigger valves, Bigger cam ( I have a .440 IN,EX. in it now) but want to go better or bigger. Carb is a 450 cfm QFT. Holly, well go bigger if have/need to.. Tires are P225 X 70 14" I'm thinking it has the 2.73 Rato...
  6. pedal2themetal

    What is a good timing for my set up..

    HI, What I have is a 75 318. gasket matched heads stock piston and bore 450 cfm Quick Flow Holley 1" spacer square bore to spread bore performer intake 0* timing set Cam is .420 lift at .50 In and Ex. duration 270 In, and Ex. 110 lobe separation. Stock exhaust manifolds true duels out. Under...
  8. pedal2themetal

    Headers for the 318 B Body Fury

    HI Who are you guys/gals using for headers on your B body Fury's 318 cu. Just looking for someone with experience on good fitment. long tube, shorties are ok too but usually to expensive, having to split the linkage is ok.. Thanks, good luck take care be safe tim
  9. pedal2themetal

    Exhaust heat riser &HP

    HI, I'm looking to have the heat riser cut out on my stock exhaust manifolds with fresh duel's installed. They want 300 to cut it out.. My question is .. is the heat riser taking power away in exhaust restriction. Weather or not is it worth removing ?? Thanks take care, be safe. tim
Back
Top