Search results for query: *

Car is a 68 Charger. I removed the instrument cluster and surrounding trim to gain access to windshield wiper mechanism. I found this on drivers side floor this morning. it was partially wrapped in electrical tape. The tape is old and pretty much just fell off. When I removed the instrument...

I want to run a wire from alt to battery and I want to run it under the intake manifold. 511 stroker with Holley Street Dominator manifold. Car has Sniper and Hyperspark. This adds a lot of additional wires under the hood. Its Easy enough to run a wire along valve cover to firewall but it just...

Looking to protect starter wires that will be routed through header tubes. 400/512 with TTI headers in 68 charger. Lots of available products. What do you use?

I have a 69 GTX. I removed the original steering wheel for restoration. I installed a different wheel while the stock wheel was off. Got the original back, removed the temp wheel, and could not install the original because the shaft that the wheel slides on to has recessed into the steering...

Car is a 69 GTX, 4 speed. The 2 upper bearing housing retainer bolts were removed. These are the 2 bolts under the turn signal switch. Is it possible to reinstall these 2 bolts without removing the steering column from the car? If so, how? Thanks