Search results for query: *

A few years back I had picked up a set of front fenders for my 72 Road Runner and I always wondered about the white stripe package on the fenders. I have never seen a 72 with that type of stripe. I would like to know if this was a factory option or added by a previous owner.

Alright guys how many different hood pin clip variants are there. I know that the 69 1/2 lift off clips have there own clip design but what about the other A,B and E bodies

To whoever may need this info I am posting the correct images and measurements for interior kick panel screws. The partially threaded screws are 1 3/8" long and connect the sill plates to the kick panels, the fully threaded screws are 1 1/2" long and are installed in the middle of the kick panels.

Does anyone know if the 67 R/T quarter panel emblems are being reproduced and if so by who.

Looking for an application for a internally threaded chrome bezel with a part number of 2507226, could not find any info online.

Was wondering if all the hood pin applications used the same size pins with the 1/2" 13 coarse thread or were there different size pins for different applications. i came across a couple of different size pins in my collection that have a 1/2" 20 thread

I have a friend of mine that recently purchased a 1969 GTX that the previous owner had installed a bench seat in, I have since sold him a pair of buckets to replace the bench seat so what I want to know is did the federal head rest mandate for 69 models include early production 69's or did the...

How many variations of the air boxes were there in 69. I think the air boxes may have possibly gone through a design change mid year I have one passenger air box that has three large slotted side vents while the majority of the boxes I have contain 2 square hole vents. I have part #s of...

Was looking at a factory radio from a 1966 Satellite for my 67 GTX and was wondering if they are the same and if not what are the differences.

Was going through some of my glass stash and was wondering if the 68 - 70 4dr models use the same vent glass as the 67 GTXs and R/Ts

I am slowly going through my assorted NOS trim pieces in my basement and I came across a piece with no part number so I have no idea what this piece is for could be a mopar part but also could be Ford or GM so looking for some possible info as far as application. Molding dimensions are 71" long...

I don't know if this topic has been discussed here before but was wondering why the two different script types on the 69 shifter handle I am trying to help a friend of mine restore his 69 GTX that the previous owner had converted to automatic and was wondering if the script type was dependent on...