Search results for query: *

Looking to buy an aftermarket Air Grabber Oval air cleaner, with oval chrome top and single 4bbl base with 440 drop. If anyone can point me to a vendor I would appreciate it.

I want to purchase the Front End Lifting Tool from US Car Tool, but all out of stock from them directly. Anyone know where I might be able to locate one? http://store.uscartool.com/uni-lift-unibody-front-end-lifting-tool.html Any thoughts on achieving the same result in another manner (I...

I leveled the car and supported it prior to cutting out the full floorpan and rear footwells. What I did not do was take reference shop floor to floorpan measurements at different locations. When mocking up the new AMD 3 piece floor (full front and LH/RH Footwells), it seems like getting the...

Old floor pans out and will be fitting and drilling new AMD full front pan and rear footwell pans in the morning. Do I need to remove edp from around holes for plug welds (edges of panel and Crossmembers)? How about the rear footwell pieces where the new panel slips under the rear seat sheet...

I bought an oil pan for my 440 in my 70 b-body from a good member here. Probably my miscommunication, but what I ended up with appears to be a 971 pan according to the 440Source and Roseville oil pan pages. Apparently came on 73-78 B-bodies. Question is, will this pan fit into my 70 b-body...

The front sump oil pan that came on my donor RV 440 looks pretty close a a b-body oil pan. Does anyone know if the front sump RV pan will fit in a 70 b-body?

I am starting with a cast crank RV 440 for a mild build in a B-body, as I have posted here previously. I need to swap to a car style water pump housing to get the inlet of the water pump to be on the same side as the radiator outlet (drivers side). I was just told by someone that the water...

Chasing some wind noises to try and quiet things up a bit on my 70 Belvedere. The rear pop out windows both seem to not be making great contact to the weather seal. The lever actually travels past a point where it pushes the window into the seal, but then as you go the remainder of the way to...

70 Belvedere. Bracket goes from vent window attachment inside door (long stud) to front door jamb by upper hinge (short studs). Broke stud, now need replacement bracket, but don't know what to ask for. Thanks - Jim