Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am still playing with my welder(using co2) and have noticed that my Voltage for .030 is a fair bit lower than with .025 for the same thickness.
Is it fair to say .030 is a better option for spot welds and panel/rust replacement as it will require less heat ?
Or is .025 the best option ...
I am a novice welder but have done some. I am having some issues with my floor pan spot welds.
Basically, I have a Hobby Lincoln 180 Welder that I have wired up for 220v.
My floor pan is 18g and my crossmember metal that it lays on shows about 10g maybe 11 on the caliper.
Regardless, I...
Just finished installing my new floor in my 65 Sat. I want to seam the firewall edge etc ?
Are you guys using caulking gun sealer or brush on ?
I hear caulking gun sealer is better ??
What are the common brands of both that you all use ?
Also, would use brush a little over the spot...
Ok.... lets hear the stories of How to apply and what product to use.....
Inner Frame Rail Coating.... who wants to go first...
Ok i will, is 10/30 mixed with Kerosene a resonable option ?
Any decent b body gravesites around the Charlotte, Concord, NC area ?
Looking for Lower cowl (top section) pass side for a 1965 satellite...
I know..... I know..... gonna be a tough get...... but.... never know....
64-5 Plymouth/Dodge Passenger Side Lower Cowl Repair Panel ?
I can buy the driver side repop but I am unable to find the passenger side piece ?
Anyone have one or a cut out one available from a donor or a company that does repop it ?
If not I will have to try to have it made somehow...
I am about to replace my floorpans to a one piece ( 65 Satellite) before I finish cutting out the remaining floor what are some good tips for securing the car from twisting ?
Some say that as long as the car is on wheels under it's own suspension load that I should not have any worries...
I am getting ready to weld my new one piece pan. (65 Satellite)
Question... i have marked where my floor braces are and will haul it back out and drill some spot weld holes so i can tack to braces .... i am getting as much rust out of the floor brace as possible but when i have to weld on...
I want to convert my car to power steering. Will I need a shorter steering wheel column and what model years parts can I steal from and what exactly will I need to convert.
thx,
:grin: