Search results for query: *

Hi all, 69 Bee with a 383, 22" radiator, no AC. The car runs and cools fine except at idle in hot weather, it starts to creep up. I will be installing a shroud soon but my questions are: - Why does the temp gauge go up when the engine is turned off? Is this just residual heat going into the...

Hey all, Happy Friday. As my 383 warms up and reaches close to the 1st tick on the pressure gauge, it's around 20+ PSI at idle. But when fully warm at idle reads 10 psi with the Rallye dash cluster. I feel that's kind of low but have read that 10-20 is fine. my sending unit is a 90 psi...

Hey all, Sorry if this is a silly question but I'm trying to figure out how the "belt molding" and cat whiskers attach to the lower rear interior and exterior quarter window glass panels. I think I may have the interior "belt molding" , if that's the correct term, installed incorrectly on the...

Hey All, Happy Friday. I’m asking because I just got my rally dash cluster back online, except for the fuel gauge. They seem to be working; my temperature runs at about 160 to 170 so I am going to confirm that by putting in a 180° thermostat, this weekend. My concern is the oil pressure gauge...

Hi all, In the ongoing saga of this new-to-me Bee, I'm continuing to find little things that need attention. It's going pretty well but one issue i had is the PO ordered the incorrect dash wiring harness. So I ordered the correct one from M&H and have most of the dash reconnected. However, I...

Hi all, '69 Super Bee with a 22" radiator, no AC. I'd like to add a fan shroud then, later, a fan clutch setup. I was looking at the below shroud but they're saying it will work for 440 only. However, the hole to hole measurements they provide are the same as I have, my fan is just under...

Hi All, I have a new to me 69 Super Bee, 383 with a 727. The one to two shift is fine, but it seems I have to let off the gas for it to shift into third. I’ve read similar posts about adjusting the kickdown linkage, but I have no idea if this is correct. It came with the car so I was hoping you...

Hey all, I picked up a '69 Bee in great shape with the body & undercarriage complete. It runs, drives, stops, the interior is original and in good shape. But I need to connect most of the dots. All dash wiring is needed (Rallye wiring harness on order), the inner and outer fenders are bolted...

Hey all, What's the difference between the RC air intake systems between a 383 and 440 B body car? Is it just the air cleaner height so it can seal up into the hood? Thanks, Mikey

Hey all, Good morning. In the search for our Super Bee I came across one contender that looks really nice however I have one area of concern. The undercarriage of the care looks pretty good, except for the pinch seam along the bottom of the rockers. I can't tell if this is rust or if it's...