Search results for query: *

I will have to replace the grommet seal where the fill tube goes into the gas tank. Will the tank have to be dropped in order to get the tube out and back in? Any tips? Also, I bought the OEM seal through Jegs. Anyone had any problems with these seals? Thanks in advance!!

68 Charger 383. Drove it to the store today and as I pulled into the parking lot, it simply just dies. No sputtering, backfiring or anything...Just quietly died. It ran fine down to the store. It will crank over but not start. Has gas to the carb, has spark (my buddy said it was weak though , so...

Just recently one of my belts started squealing when I shut off my 68 Charger. Belt tension seems to be fine, and no problem on start up and driving around, only when I shut if off. Thoughts of what could be causing it? Thanks guys!!

Anyone have any experience with the Spectra Premium radiators? I have read reviews on them (most reviews seem to be 2 or 3 years old) and one negative I find is there seems to be problems with the transmission lines fitting (what comes on the radiator isn't brass or flanges correctly). Thanks in...

Is there any good books out there for Charger restoration (specifically 68) thats someone could recommend? One that details decal placement and etc? Thanks!!

Relaced my bezel on my 68 Charger dashboard, and everything seems to be hooked up and running fine except I seem to now have a short on my right turn signal now. Left turn signal is fine, but when I engage the right, it pegs the amp. guage and I hear a little spark in the turn signal switch. I...

Trying to lower the steering column to have some room to get my instrument cluster in and out. I losened the three bolts on the support and the thing isn't moving at all...What am I missing? Thanks!!!!

Thinking about replacing the gauge bezel on my 68 Charger. Before I order a new one and get @ss deep into it, I'm curious as to how difficult this will be. Has anyone had experience doing this? It appears that I will have to remove the instrument cluster and the bezel is attached from the back...