Search results for query: *

i have a 62 dart k member i need to identify, can someone tell me if this k member is for a 6 or 8 cylinder. any help would be appreciated.

i have a 360 short block no heads.i have a pair of heads not sure where i got them casting #2843675.will these work on the 360,i know i have to be careful what heads i use because of compression, anybodies help will be appreciated.

i have a 360 i need to put heads on,i've read where you can kill the compression if you choose the wrong ones.this is just a driver and i'm not concerned with flow performance just want something that will work ok. i have 2 sets of 318 heads,1969,1974.also have a set of 340 heads but not sure...

can someone tell me what the 3 digit number on the end of torsion bars mean

i have a 64 polara and on the back of the heater defrost selector there are vacuum lines that slip on small plastic pins.some of these pins are broke off,does anyone sell replacement pieces or can these be fixed.any help would be appreciated

can someone tell me are the front door hinges on a 64 polara 4 door car the same as a 2 door car.

can someone tell what a 73 charger is a b e body,i can't seem to find this info.any help would be appreciated

a while ago someone put a detailed picture on how to disconnect the cables to a push button 727 transmission.i can't find it now,was hoping someone could repost it.i need to remove my tranny and it sure would help.any help would be appreciated.thank you

i have a air cleaner that i was told is mopar,i'm not sure there is no part number on it.top is 17 1/4" bottom is 13 3/8" if anybody can identify it,it would help. - - - Updated - - -

can someone help me out.i have a 64 polara with a poly 318 and want to put a 360 in.i want a/c but don't have any brackets,i'm assuming the poly brackets are different.can anyone post some pics of an engine with a/c brackets on it so i can get an idea what i need.

can anyone tell me are the 66 belvedere head light buckets the same as the 64 polara head light buckets

i have a 64 polara that i bought a manual steering box for.are the manual couplers the same as the power steering coupler.i know the steering column is different.my plan was to make a sleeve and extend the column.

i have a dodge 440 2 dr. want to know if the 4dr fenders are the same as the 2dr.i would think they are but want to be sure

i have a 1964 dodge 440 car that i plan on putting a la block 318 in.my question is what head to put on,i have the stock 318,a 340 ,and 360 swirl port. i want it to be a summer time daily driver, i am strictly shooting for gas milage. from what i've read the swirl port are the ones i should...