Search results for query: *

Have a set of new Speedmaster aluminum heads for a Big Block. Also New Roller Rockers. $1,500 firm. Will ship on buyer dime. Located in Hedgesville WV 25427 Heads are 74 cc's 265 cc intake runners 2.20/1.81 valves spring's are good up to a 650 lift Hdy. flat tapped cam 1.6 Aluminum roller...

Have a new Milodon Oil Pan, Pickup Tube, and Windage Tray. They have never been on a motor. They are for a big block. $475.00 Will ship on buyers dime.

Have a Comp Cams Solid Roller kit. Com with the cam, roller lifters, spring's, and push rods. This is used but in great shape. Have about 10-11 runs on the kit. Springs are new in the box. You can see what size the cam is on the card. $1,000 Firm. Will ship on buyers dime Part numbers are Cam-...

Have a set of Ross dome piston's. They are for a 440. Are used but in great shape. Have about 10-11 runs on them. They are .60 over. Come with everything. Part number on them is 99545. Can look up and see all about them. Chrysler Big Block: Open/Close Chamber: 440 - Dome Top: 4.375 Bore - 4.150...

Have a NOS Dixco Tach Still in the box. Chrome is in perfect shape. Still has book and sticker in box. $275.00 will ship on buyers dime

Have a set of new in box Big Block Polished valve covers. Have the holes for the rb heads. $175 obo. will ship on buyers dime

Have a new big block polished water pump from PRW. Never been on a motor. $275 obo. will ship on buyers dime

Have a set of Dome Ross Pistons for a 440. Also have a Solid roller comp cam kit. Have Cam, Lifters, Valve Spring's and Push Rods. These are used but spring's are new. Came out of a dragster and have about 10-11 runs on them. All is in great shape. Asking $1,250 obo for cam kit and $500 obo for...

Have a Crane Cams Camshaft. It's a Mechanical Roller. Has less than 1000 miles on it. Part number is 668951. Came out of a Ray Barton built motor. Can see specs in picture's. $200.00. Will ship on buyers dime. Thanks

Have a new in box PTC Converter for a 727 trans with big block. Has a 2800-3200 stall. Asking $450.00 obo. Will ship on buyer dime.

Have a set of RB/B intake spacers. They are in great shape. Will ship on buyers dime.

Have a set of new procomp H-beam 7.100" rods. Still in box and never used. Was going to build a stoker but went other way. $350.00 will ship on buyers dime. Part # PCE274.1117 Thanks

Have a 426 Hemi Crossram. Comes with linkage, carbs, fuel lines. The carbs are 750cfm and comes with new top plate gaskets. There are no cracks or stripped holes. Asking $3,250.00. Located in Martinsburg WV 25403

Have a original 67-69 hemi 2x4 intake. This is nos. There is no cracks or stripped holes. Part number is 4780543. Located in Martinsburg WV 25403, Asking $800.00

Have a set of MP Stage VI heads for a B/RB big block. They have been redone and are ready to bolt on. Have new 2.15-1.88 valves, Comp spring's good up to 800 lift cam, cups, retainers, keepers. They are 72'cc's. Do not have rockers. Also have MP M1 intake for a 4500 dominator carb. Asking $2,500...

Have a set of MP Stage VI Big Block heads. They have been rebuilt and are ready to bolt on and go. They have new MP Stainless 2.15-1.88 Valve's, Comp cups, caps and keepers. Comp spring's that are good for up to a "750 Solid Roller Cam. Heads are 72 cc. Have paper showing the flow numbers on...

Have a pair of MP VI heads and intake for sale. The heads have been rebuilt and are ready to bolt on and go. They have 2.15-1.88 valves, new spring's, cups, caps, and retainers. They have are 72'cc. They have been flowed and can see what they flow in picture. Intake is a M1 stage VI for a 4500...

Have a pair of stage VI heads and intake. Heads have been rebuild and ready to bolt on and go. Have been checked for cracks and came back great. Heads have new stainless MP valve's 2.15-1.88's. New comp spring's, cups, retainer's, & keepers. They are good for up to a 700' solid roller cam. They...

have a big block mopar tach drive distributor with tach and 24" cable. the tach is a 1973 tach, part number 3690201. i had it running in a hemi and took out. I am asking $450.00 plus ride for everything. if you need to know anything just let me know. thanks

I have a nos rat roaster intake with 2 top plate's. the base has never been on a motor. I have 1 signal dominator top plate that has been used and had 2 cracks on both side's, but have been tig welded and are good now. the other top plate is a 2x4 plate. it is nos, never been on a motor. I am...