Search results for query: *

Here I have a pair of each year wiper arm with 63 the left and 64 on the right. They are in nice shape with a great shine, good tension and threads. Will need new rubber blades. I would like $40 a pair plus shipping from Puyallup, WA.

Found another one of these which says it fits 1970 Charger grilles. Part number is 2998278 and it looks original. Emblem is in nice shape with only a few minor flaws in the black paint and one nick on the C. Chrome finish is very nice in my opinion but don't know why the pictures make it look...

I got these from the estate of an old racer and forgot about them until I opened the mystery bin. They are in great shape with a great original shine and paint. There are some nicks and paint flaws and one tiny ding on the top. Obviously, someone attached hood pin lanyards but did a nice job...

I got these from the estate of an old racer and forgot about them until I opened the mystery bin. They are in good shape with a great original shine and retains most of the original paint. There are some nicks and flaws. One has a small dent on the inner nose and on the top edge as shown in the...

I got these from the estate of an old racer and forgot about them until I opened the mystery bin. They are in great shape with a great original shine and paint. They appear to have been repainted and it came out nice and even though I might clean up the center bars on one to make them more even...

Here is a mint set of rear corner trim that connects to the trunk trim for 63 and 64 Plymouths. They are in very nice shape and have all the clips but are missing the nuts. There is one small imperfection (scratch) towards the tip that you can see at the right angle, but I can't feel it. I would...

These have been laying around for too long so time to go somewhere else. The are not mint but in decent shape for their age. The nicer ones are on the left or top in the first picture. There are two hood ornaments, two trunk lock cover and 2 trunk emblems. Trunk lock covers are not broken but...

Here I have a set of left and right stainless-steel A pillar trim with the roof and lower transition pieces. These should fit Dodge and Plymouth but am not sure what models the top pieces are correct for. Pieces are in nice shape with a great shine but are used and have some swirls and flaws. I...

Found these laying around and was going to toss them but thought I would check if someone could use them first. They both have flaws as shown in the pictures ranging from some cracks to the one having a melted spot on the back lip. I would consider them driver quality only. Free but you pay the...

Nearing the bottom of the table was this piece that I got in an early B parts lot. It is a very nice original jack hook. Can't tell if it has been used or the odd wear pattern is where it sat in the trunk. Would be perfect for a nice survivor maybe even show. I would like $40 plus shipping from...

Thought I had gotten rid of these, but the cat found two pairs behind my computer. These go on the C pillar, are not reproduced as far as I know, and seem to have become scarce even on eBay. All are in very nice shape with very few imperfections in the chrome and they retain most of their black...

These have been floating around on the porch for too long and need to go so I hope someone can use them. These are the end trim pieces for I believe both 2 and 4 doors. They are in nice shape but do have some fading of the gold, with the passenger side being a little more than the drivers side...

I have a pair of these trim pieces that mount to the fender and go between the edge of the fender and the headlight bezel. There are in nice original shape but could use a buff and a repaint for show quality. All the mounting pegs and clips are present. Also there are no dents but nicks from...

Towards the bottom of the table pile were these bad boys. Think I got these from the estate of an old racer. They are in amazing shape with a great original shine and paint. There are few nicks, but I didn't see any dents or twists. I did not clean the inner silver area around the lights as I...

Here I have a nice set of finish panels I pulled out when another member was looking for some. He bought the other pair I had so instead of disappearing back into the garage it is time for them to leave also. They are fairly straight but could use a buff and repaint. There is a wave in one of...

I have had this pair of vintage Year One reproduction emblems in the garage for 20 plus years and time to pass them on. These are the old VC 149 emblems circa 1996 and are now labelled VC 4075 for reference. They are in the shape you would expect being new and in the original packages. In...

Found these sitting on the windowsill on a transmission mount box. Again, don't know why they made it in the house, but they need to go. Basic pair of V8 emblems used on various cars for multiple years. They are in nice shape with the standard paint loss on the edges and one has what feels like...

Found another trinket hiding on the table that I brought in when someone was looking for one. It is in nice shape for its age but does have some peppering but no pits, would be good for a driver. Mounting studs intact but no nuts. Thought maybe someone could use it as I never will. I would like...

Here I have a very nice fender emblem that I do not need. I believe this fits a 68 Satellite as that is the information I could find about it online. Part number is 2785602. This one is all black and not the typical red, white and blue that I am used to seeing. It is in great shape with a...

Cleaning the house of random parts that have made it in. These are from a deal that never materialized. They are in nice condition with no major flaws and are a matched pair of left and right. I would like $5 plus shipping from Puyallup WA.