Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is a very nice set of original set of Charger reverse lights. They have the curve to fit the rear panel. Part number ends in 453
Sorting through my 69 plymouth parts, and these didn't fit right.
Bulb sockets float in and out nice. They have not been lubed.
One inside is factory galvanize...
This fits plymouth, not sure on dodge. 63 and 64 for sure. Don't know about 62 or 65. I know it does not fit 62 dodge.
Still in its original black paint, and quite nice.
$30 + shipping
Heres a pair of quarter panel window mouldings.
The left is acually quite good, the R, not so much.
I'm selling as a pair as you might not have any.
$30 plus shipping.
There is an NOS R side on ebay for like $60, if you need a good R
I have a pair of rear belt mouldings and a single.
The pair, L is very nice, no defects to highlight. The R has several small lifted dimples from removing. Someone fought with a stuck screw, so the forward tab had some distortion. All hidden once installed $175 for the pair.
A spare...
Trunk fresh bumper jack. With tire iron.
Slot bumpers came mid year in 71, and this is from a 71. It's the unusual green color, followed by light blue in 72.
Decent shape. One corrosion patch that was behind the jack unit. I have not lubed it, but it functions
$70 plus shipping from 98275
I have a 1969 road runner passenger door shell, needing a lower patch. Door is super straight, has all the factory undercoat intact on the inside. Drilled for road runner emblem. The interior jamb is good, just the folded skin edge is coming loose.
"Rare" petty blue should make it worth...
Here's a no corrosion, straight, hood lip moulding. Will ship in a pvc tube. 50"
long. West coast, near Seattle if you want to check shipping costs.
$125 plus the mail truck
These are very nice condition, no rust rear bumper brackets. One welded nut popped off. Picture makes it look like they are rusty, but it's surface haze, no pitting.
No excuse parts. Always check fit before tightening bumper to avoid an inside out dent from bracket tab alignment.
$150
Plus...
If you got rust and are replacing your trunk floor, you may need a rust free factory trunk latch support.
$25
Save on shipping and get a good latch plate for an additional $20.
Maybe a good latch too.
Plus shipping, from 98275
A very rare, but not valuable Dodge rear tailgate finish plate.
One broken stud, some flakes on lower edge, but nice overall.
I, as a wagon lover extraordinaire, have only seen 2 in person. A couple pictures online.
Normally on a lower line car.
$125 + shipping
Good pair of brackets off a straight, but bad chrome rear deluxe bumper.
Brackets are really rust free.
$75 and shipping
Rear bumper is available for free as a core. Shipping will be a killer.
Deluxe bumper with holes for bumper guards. Had peeling chrome so face has surface rust...
From a 69 Coronet if 68 is different.
This latch has been blasted, etched, phosphate washed and coated with an early version of my etching brown finish.
The coating has a soft matte, low build coating that is almost translucent. So no film build to scrach off.
I used my collection of hood...
Trunk latch with very nice plating and rust free latch plate.
Sold as a pair, $50 each. Plus USPS
If you need a latch, I have others, $20-25 depending on the condition of the plating.
If you want the latch plate blasted, just say so and i can.