Search results for query: *

This is a single diaphragm drum brake power booster that I got in a group of parts from a 1968 Coronet project. If there are any markings on it, I cannot find them. I have not tested this unit to know how well it works. Safest to assume that it is a rebuildable core but I've had great luck...

I have two pair of these. These came from a 1985 Chrysler Fifth Avenue and are physically identical to every steering spindle used on nearly every 1973-89 rear wheel drive car except for the C body and Imperials. The upper ball joint tapered hole is the same size as all B bodies. Included are...

I have a USED 2.76 ring and pinion set from an 8 3/4" axle with the '489 case. Excellent condition. No differential, just what you see in the pictures. $125 plus shipping. PayPal preferred. I ship from the USPS most of the time. Gears will be shipped packed in the box that you see in the...

I have a 4 speed shifter assembly that has no external markings that I can find but I am told that it is an "Inland" unit. It is used but functional. It comes with a rubber boot that attaches to the underside to seal out road grime. $40 plus shipping. PayPal accepted. Part will ship from Granite...

I have a partial section of the under dash linkage assembly used for power brake applications. It has surface rust but is in good shape otherwise. See pictures. $20 plus shipping. PayPal preferred. I ship USPS mostly and will email or text the tracking number the day that I ship. The part is in...

I have several Big Block 727 transmissions and I don't need them all. Two have 11" converters in them, a couple more are just complete transmissions with no converter. All of them are car transmissions with the provisions for the floor shifter bracket. This would mean that they are NOT the heavy...

I have a recently rebuilt 46RE transmission that was used in a '70 Barracuda for a short time. The owner swapped to a 5 speed manual and pulled this trans out. It has been rebuilt with 618 internals designed for Cummins diesel trucks. It has a 10" 3000 stall LOCKUP converter. The trans was used...

Hello again, I have a 1977 440 V8 short block for sale, cast 4-2-77. It is .030 over with cast flat top pistons. External balance with correct balancer in place. NO camshaft. Oil pump/distributor drive is in place. I do have some '452 heads for this engine as well as '906 heads for an additional...

I have a running 340 4 barrel engine cast 2-7-72. .030 over. J heads, 4 barrel iron intake. Chrome valve covers, 90 degree oil filter adapter included. NON stock exhaust manifolds. This engine is externally balanced and has the harmonic balancer in place. I can include a forged 273 crank...

Axle came out of a 1970 Polara, I'm told the width also works for 1971-74 B body cars. 65" wide from outside of drum to outside of drum. 11" drum brakes are included. 47 1/2" center to center on spring pads. '489 case, 2.76 gear OPEN differential. All lug bolts are intact, drums are good but...

The pair need bushings and ball joints. Not rusty, just dirty. $80 pair. $15 shipping anywhere in USA. Thanks for looking, Greg *********************************************************************** edit: The first pictures here are A body UCAs. I'm currently looking for the pictures of the...

Unsure of the year. Housing and base complete. Note the missing nipple on the snorkle. Carb opening is approx 4 1/4" $30 Please note that there are TWO separate air cleaners here. One has a base, the other does NOT. Unit without base $20. Northern CA Pay by Paypal

-------------------------------------------------------------------------------- I have a 1968 440 4 barrel. It was decoded to be from a 1968 Coronet R/T. Complete long block with intake. Was recently pulled from a 67 Chrysler 300. Has Magnum style exhaust manifolds. Casting date 4-4-68. Will...