Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For sale are door latch parts from a 1973 B Body (Satellite 2 door). May fit other years 71-74.
Parts list:
- RH door latch
- RH bell crank
- RH interior door handle pull
- RH door jamb catch post
(1st pic)
- LH bell crank
- LH interior door handle pull
- LH door jamb catch post
(2nd pic)
All...
For sale is a 1968-70 B Body door window regulators (pair).
Selling as cores
Removed from a 1968 Plymouth Satellite.
$15.00 (pair) + shipping US lower 48
Local pickup is available in Akron, Ohio
For sale is a pair of 8-3/4 axles for 1965-67 B Body.
Removed from a 1966 Plymouth Belvedere.
OEM left hand studs intact.
Per Moparts tech(in Italic font):
8 3/4" axle shaft lengths measured from the tip of the splined end to the outside of the flange:
B BODY
'65-'67= 28 7/8"
$30.00 + UPS...
I have 2 Mopar pinion snubbers that were sandblasted and black primer.
Unknown applications.
Center hole to center hole measurements:
A. 2-1/4"
B. 2-3/4"
Snubber (B.) needs the tabs folded over.
Again unknown applications, selling cheap.
$20.00 for the pair + shipping USA lower 48.
Parts...
For sale is a 1966-72 B Body and 1970-74 E Body strut rod (1).
It's in pretty good shape (straight). OEM nuts on both ends thread nicely.
OEM rubber and washers included.
Removed from a 1968 Plymouth Satellite.
$30.00 + shipping US lower 48.
Part is located in Akron, Ohio
For sale is a pair of 8-3/4 axles for 1965-67 B Body.
Removed from a 1966 Plymouth Belvedere.
OEM left hand studs intact.
Per Moparts tech(in Italic font):
8 3/4" axle shaft lengths measured from the tip of the splined end to the outside of the flange:
B BODY
'65-'67= 28 7/8"
$50.00 + UPS...
For sale are 4 OEM power window motors removed from a 1968 Dodge Charger. I believe these are the same up into the early 80s.
Part Numbers:
LH front: 2520903
RH front: 2520902
LH rear: 2520903
RH rear: 2520902
All wiring is in good shape.
SELLING AS CORES ONLY!!!
Under my knowledge, all but...
For sale is a set of 10" front drum assemblies (RH & LH) from a 1968 B Body.
Drums, hubs, backing plates and guts.
$50.00 + UPS shipping US lower 48.
Local pick up available in Akron, Ohio
Thanks
For sale is a OEM points distributor for a small block.
Removed from a 1968 Plymouth Satellite with a 318.
In good used condition. Selling as a core.
$15.00 + US shipping (lower 48).
Thanks
For sale, 1967-68 B Body 3 speed (variable) wiper set-up.
- Wiper motor 2889982 (73691) (2407)
- Crank arm 2580934
- Linkage rods RH 2857922, LH 2857919 (includes 3 oem plastic bushings)
- Switch 2864014
- Pivots RH 2857920 LH 2857921
Removed from a 1968 Plymouth Satellite.
Motor was bench...
Fore sale is an auto column crossover shift linkage for 1966-70 B Body.
This is the linkage that goes from the steering shaft to the trans.
Removed from a 1968 Plymouth Satellite auto/ps/small block/column shift
Not sure if BB is the same. I think if it's different it would be the linkage after...
For sale are 1966-70 B Body K frame bolts (4) OEM.
Removed from a 1968 Plymouth Satellite.
These will clean up nice.
$20.00 + shipping.
Parts located in Akron, Ohio
Thanks
For sale is a water valve removed from a 1968 Satellite. In good shape, moving parts move okay. Selling as a core but might be good as is.
$50.00 + shipping.
Located in Akron, Ohio
Thanks
For sale 1965-67 B Body 8-3/4" rear end housing. Removed from a 1966 Plymouth Belevdere. Still has the original LH studs on the driver's side.
HOUSING ONLY as seen in pics. (brake line block bolt included).
Measurement specs: (source Moparts tech)
Housing widths, flange to flange: 1965-'67= 54...
I have a speedo cable housing with hold down clamp/bolt. Also I have a 26 speedo gear that goes with it. It has good teeth all throughout.
Trans levers: kickdown & shift.
$30.00 for all + shipping.
Thanks