Search results for query: *

I am selling an original transmission cooler from a 1966 Hemi Charger that was wrecked and parted 40+ years ago. There is no damage other than some fins that need straightened. The price is 475 plus 40 ups shipping The reproduction are 695 so you can save here. This will be very well packaged. I...

I am selling an NOS Distributor Hold Down Clamp for a Mopar 413 426 Max Wedge or Hemi This is a NOS part that has never been installed but it had some discoloration from sitting 60 years so I cleaned it in evaporust. It has NOT been blasted. The reproductions are different in appearance and will...

I am selling an original distributor tag for a 1968 Mopar 440 4 speed application. This is an original tag and NOT a reproduction. The price is 39 including shipping in the USA. I accept paypal and credit cards over the phone.

I am selling a passenger side sway bar lower control arm for a 66-69 Mopar b body. This is in nice original condition with no damage and no pitting issues. The price is 100 plus 35 ups shipping in the USA. I accept PayPal and credit cards over the phone.

I have a lot of suspension and steering parts available. This is part of a 30 year parts collection I got last year. The 70 brake rotors are sold along with the disc brake spindle sets. Most everything else is still available. Also there are hundreds of small parts in boxes and loose as seen. I...

I am selling a matched pair of front disc brake rotors for a 66-69 Mopar B Body. These are very early take off parts that are in very nice condition. It looks one has been turned but the other has not. All the studs are fine and are the correct lefts and rights. The original bearings and...

I am selling a Hemi K Frame for a 1967 B Body. I believe it is different from a 66 as this one has the double fork idler arm mount and a 66 and back is different. This looks to be an early reproduction but is done very nicely and everything fit in the car with it fine. This is a very nice k...

I am selling a set of 426 Hemi pistons. These are stock pistons. I would only consider these good display pieces or to use to make a trophy out of and NOT for use in an engine. The price is 75 plus 25 shipping in the USA. I accept PayPal and credit cards over the phone.

I am selling an original Mopar 2582948 radiator. This s correct for a 1966 B Body with the 426 Hemi. This was taken off and stored decades ago. I would have it at least serviced and probably recored since it is original. The price is 475 plus shipping. I accept PayPal and credit cards over the...

I am selling a brake booster and bracket assembly for a 66-69 Mopar B Body with the 426 Hemi. This is the CORRECT Assembly Line Original and not a reproduction or a modified one. This was removed and stored inside decades ago and is in very nice condition to restore. There is only very minimal...

I am selling a transmission cooler for a 66-68 Mopar B Body with the 426 Hemi. This is an assembly line original part that was removed and stored decades ago and still even has fluid in it. There is no damage I see except for some of the fins being bent over. This will be easy to repair with no...

I am selling a double snorkel air cleaner for a 1970 Mopar big block hp. This is the correct 1970 ONLY version. This was painted orange a long time ago but there is no damage and very minimal pitting in a few places. The price is 275 plus shipping. I accept PayPal and credit cards over the phone.

I am selling 9 connecting rods for Mopar 426 Hemi. 6 of the rods are matched and the other 3 have a slightly wider radius at the small end. I do not see any damage or evidence of a spun bearing. The price is 275 including shipping in the usa. I accept PayPal and credit cards over the phone.

I am selling a matched set of main caps for a Mopar 426 Hemi. These were removed from a damaged block decades ago and stored inside. There is no damage and there is no evidence of ever having spun a bearing. The price is 285 including shipping in the usa. I accept paypal and credit cards over...

I am selling an original transmission cooler for a 66-68 Hemi automatic. This was removed decades ago and has been stored inside. The ends were both capped and it was holding fluid still until I took them off for these pictures. This would need restored as you can see. The price is 150 plus...

I am selling a D440 HP block, steel crank, rods and a matched pair if 452 head castings. The block has been cleaned, decked, rough bored .030 and magnafluxed. The heads have been cleaned, magnafluxed and verified to be good with no cracks. The steel crank has been cleaned, verified to be...

I am selling an original 1963 Mopar 426 Max Wedge T85 3 speed bellhousing. This is a correct assembly line original with Mopar part number 2402221 and date code 9 - 7 - 62. This is an aluminum bellhousing and is unique to the Max Wedge cars only. This is in excellent condition and has been...

You are buying a Pistol Grip 4 Speed Steering Column Interlock Linkage Setup for a 1970 Mopar B Body. This is an ASSEMBLY LINE ORIGINAL SET that has been cleaned, stripped and then restored in a black phosphate finish. This is a very nice set with no pitting and no damage. This is 175.00...

You are buying a matched pair of 68 - 69 Mopar Big Block 383 440 HP Exhaust Manifolds. These are casting numbers 2843992 and 2863900. These have both been cleaned, blasted, checked for cracks (none were found) and then refinished in high heat cast iron ceramic. The heat riser valve is frozen in...

You are buying a Stainless Steel Brake Corporation front disc brake kit for a 62 - 72 Mopar B Body or a 70 - 74 Mopar E Body. This is a NEW KIT that was installed on a car that never got finished and never was driven. I pulled these off and reinstalled the drum brakes and can 100% assure they...