Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Was a spare for the #88 Daytona. It has better coils in it for more starter hp.
Capable of turning over a 12.5 to 1 ratio 426 Nascar hemi.
$295. including shipping east of Mississippi from 48317. Add $25 west.
Paypal ok, thanks.
Had these sleeved and restored by Ram Man and never used them.
Check out the casting numbers. These have heavy duty Nascar quality seals on the ends.
Were stored in an airtight container.
Last pic shows a sleeve. Hopefully, somebody can use these.
Asking $395. Add a bit for shipping depending...
This Dominator was a spare for DC-93, the real #88 Daytona.
I had it restored and flowed on the bench by Holley.
It's set up for a bathtub intake.
I'm asking $1,500. or best offer for this gem, shipping included, from 48317 in conus.
You won't find a nicer one.
I'll ship the original Holley box...
Each one hand made by Nichels Engineering in the late 60s. 3 required on each side.
No 2 are the same! Drilled so they can be wired together to not loosen up.
Set of 6, asking $295., including shipping in conus from 48317.
$150. including shipping in conus from 48317.
Slides over a standard MoPar ignition coil.
Handmade at Nichels Engineering in the late 60s.
Paypal ok. Thanks.
You won't find a nicer set of original Super Stock spark plug wires.
All the lettering is there, intact, including the date codes.
Includes the coil wire.
$975. including shipping in conus from 48317.
Paypal ok. thanks.
Real deal, bought from Tom Tignanelli about a dozen years ago.
Turned out I needed the 90-degree boots for my restoration.
Tom drove the Mule Cuda Test car for Chrysler. This set was on the car for a few passes.
They look NOS. All the wires have lettering, including the coil wire.
You would be...
Set of 6. Each one was hand made at Nichels Engineering in the 1960s, that's why no two are the same.
These are required for the bathtub intake, inboard side between the valve cover and lid.
Note they are drilled for safety wire. $300. including shipping from 48317. PM please. Paypal ok. Thanks.
Has provision for remote cooler. Includes the vintage Mopar filter.
Asking $426. shipping included from 48317. PM please. Paypal ok. thanks.
LOWERED TO $300.
Chromed back in the day! Approx. 5.75" diameter. May have been on a cutaway show engine...
Asking $375. shipping included from 48317. PM please. Pay Pal ok. Thank you.
LOWERED PRICE - $295.