Search results for query: *

I have 4 rear end u bolts that are new and never been installed. Please look at the pictures and be sure they are what you need. I do not know the application but have put a tape measure on the length and width... Asking $25.00 plus shipping. I also tried the fit on a 64 tapered axle 8 3/4 and...

I have a pair of 10 inch front backing plates from a 62 B Body, might fit other models and years. They are blasted and ready for paint. Asking $50.00 plus shipping....

I have a windshield wiper motor out of a 62 b body. The numbers and manufacturer are, Autolite EPV4003-12V. I have another motor with only 2 wires, but this one has 4 wires. It might be a 3 speed motor. Anyone chime in with info....Thanks. Asking $50.00 plus the ride.

Have a 62 B Body K frame that has been blasted, epoxy primed and ready for paint. Thanks to all the guys who helped me clarify what it fit...Asking $350.00 plus shipping or local pickup.

I have a 10 spline pinion yoke for a 8 3/4 rear. please see pictures and pm for more info if needed. Asking $45.00 shipped

I have a shackle kit with the rubber bushings which looks to be new. I sold the first pair I listed and I believe this also fits a B Body 8 3/4 rear.....Asking $35.00 shipped....thanks

I have 2 rear shackle kits that I think are for a 62 up 8 3/4 rear. The set in the picture does not have the rubber bushings but the second one does. I will list a lot of parts in the next few weeks, as I have just bought a van and a half of 62 Sport Fury 2 DR HT and some convertible parts. I am...

I have 2 small block crankshaft pulleys that are both 3 groove. One is for a cast crank and the other for a steel crank. Asking $40.00 each or both for $60.00 plus the ride to you....

I have a set of .030 pistons, rods and rings for a 318 engine....They are flat top Speed Pro and the rings are Hastings....Rods are stock . Asking $200.00 plus shipping....Have them listed on ebay. The pistons and rings are new. I can send pics if interested as I do not know how to send link...

I have a windshield wiper assembly that I believe came from a 62 or 63 B Body. The numbers on the 2 transmission rods are 2258554 R and 2258555L and on the motor are 2258580-26345 263. these pivots are for the bolt on wiper arms used from 57-64. Asking $65.00 plus shipping....Thanks.

Air conditioner idler pulley. Might fit big block and small block?? Asking $60.00 shipped.....

Mopar dual pulley alternator P/N 2095192. I took it off my car when I deleted the A/C unit and went with a single pulley unit.....Asking $45.00 shipped.

Mopar manual steering box. In good condition, very tight. It is for 1 1/4 sector shaft and comes with the lock washer and nut....Asking $95.00 shipped

Have a windshield wiper motor, with pivots and new seal kit. The part number is 2258554R. It will fit 62 to 64 B Body, but might fit as early as 1957, because the pivots accept the screw on wiper arms..Please look at the pics and p.m. me for more info.....Asking $75.00 shipped. Also the pivot...

Mopar speedometer gear, red, has P/N 4028657 on it. Do not know what it fits maybe some one needs it or can tell me the application....Asking $20.00 shipped.

Mopar P/N 52068157 green 31 tooth speedometer gear in original package. Asking $25.00 plus $3.95 shipping.

Have a manual steering box for sale. Think this fits a variety of Mopars from 62-70's. Asking $90.00 plus shipping. PM for more info or pics.

Have 2 left and 2 right front fenders for 62 Plymouth b body. All have typical rust on bottom. Asking $150.00 each, plus shipping. PM me for more info or photos.

Have a manual steering shaft that should fit 62-65 b body. Asking $80.00 plus shipping. PM me for photos or more info.

Have A/C heater box from 64 Polara. Asking $175.00 plus shipping. PM for pictures.