Search results for query: *

These are out of my friend's Tri City performance shop that he ran for 30+ years. 74 440HP that was rebuilt once 30 years ago but unknown miles. It has the 906 HP early cylinder heads. $950.00 (Now have a Deposit on this particular one and will be delivering it to So Cal next week). 72 H440HP...

Here is a 1970 340 out of my Friend Gregg's (RIP) shop. It is the steel Crank and the 496 Full floating rods. It has all the accessories pictured including the factory HP camshaft and double roller chain. It has timing cover/pan /water pump/ fuel pump/Motor mounts/ dampner/ pulley/ brackets...

Here is a 1972HP and a 1974 HP 440 Magnum Engines out of Gregg's (RIP) shop. They are steel crank HP engines that are pretty complete. The 1974 was allegedly rebuilt at one time and has the earlier preferable 906 Type Cylinder heads that were on the late 69s and early 70s engines. I have no...

1969 Roadrunner "Air Grabber" Air Cleaner Complete and Like New! Take off my car in early 1970sl Paint and decal original and nice $750. Hood Grille Inserts for same car with Air Grabber = B5 Blue paint but could be painted of course $150. Plus the ride for either one I can deliver is So Cal or...

These all came out of Tri City Performance. Greg Luneack (RIP) was a close friend and one of the very top Max Wedge engine builder and National Event winning Max wedge Stock/SS racers of the last several decades. He had a complete machine shop on premises and did all work himself. He is truly...

I found this back of shop where it has been 40+ years. It is the big 850 CFM Big block carb of my 1972 400 HP Roadrunner that I bought new and turned into a Race Car when it was two years old. It is low usage! It is correct for a High Performance 400 in...

Shock Plates and U bolts (Fit A/B/E).......$90 plus $16 shipping Front Spring Hangers (B/E)..........................$60 plus $16 shipping 6 Cylinder torsion bars (B/E).......................$90 plus shipping There have been in the shop 40+ years and not worn out bars that need to be adjusted...

My very close friend and the man who has prepared most of my cylinder heads for all my race cars has been sadly forced to close his shop due to Health challenges! Here is a trailer load of his selected Mopar heads that he has collected to prepare as ordered by racers. All have been Hot...

I found this back on the shelf that I did not know existed. It is the legendary 9800 Performance Carter Superquad. These are calibrated and designed without the emission junk on the production carbs for High performance. They require no modification to the circuits that the original carbs do to...

Here are a bunch of Torqueflite Transmissions 2892031 67/68 383 HP ( I think out of a 67 Cuda Form S) $295.00 3515846 71 383 HP $295.00 3515852 71 318 $275.00 Hard to find: 2801541 1967 Dodge RT 440HP (Correct for 67/68 RTs and GTXs) $375.00 904 Slant 6 / 904 $250.00 I will deliver for...

I found these in my stack of Thermoquads on the shelf! 6139 is 72 340 Auto 6340 is 73 340 Auto I will take them apart and make sure they have not been monkeyed with or missing any parts and work freely. I will adjust the Floats and Air Door and put back together ( I am not rebuilding them =...

I moved a box and found four 1973 340 Automatic Thermoquads. They have been in the shop since somewhere in the 70's All shafts are tight and everything works as it should. I have two 6319S and two 6340S They are totally original and not messed with at all. I would suggest putting a kit in them...

Here is a nice virgin set of 1971 exhaust manifolds that have been on shelf since 70's in my Shop. They have no damage or modifications. Flapper is intact but will need cleaning as it is stuck after sitting on the shelf for 50 years. $850.00 plus $60.00 shipping in US

Here is a 340 Distributor that has been on the shelf since the Mid 80's IBS - 4015A Tag # 2875105 Prestolite Vender Normal Wear that you would expect on a part this old But a very hard to find part that is rebuildable $250.00 Plus $19. shipping in USA

Here are a bunch of Covers that have been hiding in the back of the shop for 40 years. They are flat and very little corrosion not like then one you will find in Junkyard that always leak. $30.00 B Engine $60.00 A engine (Aluminum) $25.00 Slant 6 I just found two of the Rare ones with the...

Fully Prepared 1970 340 Engine Not filled and Suitable for Street or Race. Block was Acid Washed and the Sonic Tested (Really Good) Deck corrected side to side and equalized @ .020 Align bored checked and perfect Engine was bored .030 with Sunnen and Torque Plate It has been sitting in the shop...

Here is a rebuildable 340 Only had a few thousand miles .060 Forged / Coated Needs one sleeve due to a minor scratch in a Cylinder Crank needed polishing but assembly is balanced and was redone .030. All Hardware and tin included = Totally Complete! 284 Camshaft Double roller chain...

Here are the Last 4 Bare,340 Blocks in the Shop sitting done 40 years 1) 340 Standard 7/9/69 Will Clean easy at 020...........$1,450. SOLD 2) 340 .030 3/20/73 .030 Just Hone............................$1,100. 3) 340 .040 6/20/67 .040 Hot Tanked / Just Hone........ $1,100. 4) 340 .040 9/29/71...

Here is the nicest 340 Block I have ever found! Sitting in my shop for 30+ years. It is Hot Tanked/Oven Baked. The align bore is perfect It sonic tested great They Deck test very Square. It Standard Bore and very low mileage I was going to bore it .020 but some people would possible say Hone and...

Here is a nice 1969 383 Carter AVS It has been sitting in the shop for 40 years+ 4638S Correct for 383 /auto However, It will fit Small blocks as well and they seemed to run better on my 340s than the original carbs on my cars. Complete and Moves freely shafts operate freely. $135.00 Plus $24...