Search results for query: *

Used OEM 8 3/4” center section. 3.23 ratio, 742 case with clutch-type suregrip and small yoke. Turns freely teeth look fine and axle thrust buttons are in place; have not used personally. $750 pickup from 16602 preferred but will ship on buyer’s dime.

OEM Mopar 22” Radiator #2998957 correct for 1970 B/E body 383, 440 Auto w/ heater. Looks to be in good shape but I have not put water in it nor applied pressure. Side brackets are tight, more pics available. $300 + shipping from 16602, Pa

NOS Mopar disc brake caliper Piston seal kit. Includes steel piston, seal and dust cover. PN- 4026123 Fits late 69-77 B/C/E body cars (not A-body). Please check your app first as this supersedes P/n 2925201. $55 shipped within the lower 48

Used OEM 8 3/4” 3.23 sure-grip center section- 741 case with factory auburn limited slip and large yoke. Spins easily; looks the part. Asking $650 + shipping from 16602. PM with questions/ interest.

OEM late 1968/ 1969 B-body HURST 4 speed console shifter handle. Chrome is nice with little to no pitting but some wear (needs polished up). Number on handle is 6337. Has outlined HURST lettering unlike early ‘68. I ran a nut on to show threads are good. $450 OBO + shipping.

Nice 8 3/4” Richmond R/P- 5.13 ratio, Fits 489 case and has a coarse spline pinion. Looks to be used very little. Asking $225 shipped within lower 48.

Used OEM Mopar 10.5 Aluminum bell housing- PN #2892513 correct for 1970-72 big-block but can be used with any 4.807” diameter bearing support. Freshly blasted with no overt cracks or chips. Asking $525+ shipping. May be able to deliver to Chryslers at Carlisle with prepayment.

Very nice condition. Factory issue on HP big-block with axle package cars (3.55,3.91,4.10 ratios). Perfect finishing touch to your car. Bottom fin is a little loose. $375 shipped to lower 48 from 16602

What you see is what you get. It’s in rough shape but better than nothing if you need one. OEM 1970 ONLY console handle w/ slip in bayonet style for the purists- repops are bolt on. Asking 150 + shipping from 16602

8 3/4” center section- OEM 3.23 ratio. 489 case, cone type sure grip, small yoke. Spins easily- appears to be in good shape. Can deliver to Carlisle with prearrangement or pick up in PA- 16601. Asking 750

8 3/4” 3rd member: 489 case 3.23 ratio with cone type sure grip and small yoke. It spins smoothly- but I have not run it personally so selling AS-IS. Can deliver to Carlisle with prepayment or local pick up from 16602. No shipping at this time. $750 Also have a 3.55 489/cone/large yoke I could...

Set of used OEM four speed pedals for 1971-up B-body and 70-74 E-body. What you see in the pics is what you get. Someone cut the original pedal housing and trashed it hence the disassembly. You will need to get a new bearing/bushing kit. $200 shipped to lower 48.

OEM set of 1968-69 Factory 383/440 HP exhaust manifolds. Appear to be in great shape with no cracks or repairs evident. Heat riser turns freely. Part numbers in pics- can’t determine casting dates. Asking $425 plus shipping from Pa. (Venmo, Check or M/O) Possible delivery to Chrysler’s at...

New reproduction (possibly Classic industries?) Mopar 340/440 Six pack idle solenoid. I have not tested it so I’m selling AS-IS. Acquired it with some other parts so can’t swear to it’s history. Priced accordingly- 75 shipped within lower 48.

1970-71 Factory 383/440 HP exhaust manifolds. Appear to be in great shape as seen in the pics. Heat riser turns freely but is missing the return spring. Asking $475 plus shipping from Pa. (Venmo, Check or M/O) Possible delivery to Chrysler’s at Carlisle with prepayment. Thank you

Center section- 489 case with OEM 3.23 R/P and cone-type suregrip; new bearings, crush sleeve and seal. 7290 (large) yoke. $650 + shipping from 16602. Pick up preferred. PayPal add 3%, Venmo or Possible Friday delivery to Chrysler’s at Carlisle with prepayment.

8 3/4” 3.23 ratio, 489 case, Cone-type Sure-grip center section, small (7260) yoke. OEM ring and pinion, new bearings, seal and crush sleeve. Ready to drop in. Asking $650 + shipping from Pa 16602 (PayPal add 3%)

8 3/4” 3.23 ratio, 489 case, Cone-type Sure-grip center section, large (7290) yoke. OEM ring and pinion, new bearings, seal and crush sleeve. Ready to drop in. Asking $725 + shipping from Pa 16602 (PayPal add 3%)

Used Big Block Mopar Truck bell-housing PN 3497272. Casting date 8/30/77. For NP435 Trans with 5.125 bearing retainer. Looks to be in good condition with clutch fork, boot and clutch adjustment rod. Also included is an internally balanced 11” 143 tooth flywheel. Needs a clutch fork pivot...

1970 specific 4 speed pedals complete with mounting brackets/under dash supports and a working clutch safety switch- tested. The needle bearings have been replaced along with new pedal pads. New lead for the clutch switch was soldered on. Brake switch was tested and works. New over the center...