Search results for query: *

For sale is an aftermarket Mopar drum brake master cylinder. This was on my current project 70 Cuda when I got it but I am not going to use. It was mounted for several years but has never had any fluid in it. Does have some staining on the lid and has some black paint on it. Has no numbers on it...

For sale is an original Mopar divorced electric choke ballast resistor that is stamped with part number 4091034. I got this off of a late 70’s truck years ago and has been in storage ever since. I checked it with an ohm meter and shows continuity. It does need a good cleaning. Asking $15...

For sale is a used original Mopar power brake booster firewall mounting plate for 68-70 B Bodies. This came from a 69 Coronet and has been in storage for many years. Does include the long wiring retainer but the metal inside is broken and it does not bend any longer. It does stay in place when...

For sale is a new repro clutch pedal over the center spring pin for 71-74 B & E bodies. It is brand new never used pin that one side is smaller diameter. Asking $25 OBO including shipping to the lower 48. PayPal,USPS MO,check or cash. Thanks for looking just trying to fund my current project...

For sale is a new never used aftermarket disc/drum brake proportioning valve. Got this several years ago with a front disc swap kit but did not use it. It has never been installed or had any fluid in it. Could use a good cleaning has a couple stains on it but has no numbers on it. $20 OBO plus...

For sale is an original Mopar NOS air cleaner to manifold hot air tube. It is approximately 12-13 inches long depending on which side you measure. It does not have any numbers or a part label on it but I got it in the mid 90’s when I worked at the first dealership I worked at. It was originally...

For sale is a used original Mopar 340 cast crank balancer. I have had this for many years and never used it and the engine is long gone. Stamped with Mopar number on the back. It’s in good shape but the rubber does have some cracks in it on the back side. Hopefully someone can use this. Asking...

For sale is an original Mopar A/C filter drier mounting bracket that came off of a 69 Coronet. The mounting plate is a little wavy from where it was originally mounted to the inner fender but in overall good shape. Asking $40 OBO plus shipping from 22630 or local pickup. PayPal, USPS MO or...

For sale is an original Mopar 340 windage tray. I have had this for years and never used it. It has been cleaned in molasses and only has one small ding on the side. Original Mopar part Asking $50 OBO plus shipping from 22630 or local pickup. PayPal, USPS MO or personal check

For sale is a 70 (I think)Charger quick release fuel cap and trim ring. I don’t know much about these as I got them with some other stuff that I needed. Is hand written on back 70 Charger. They do have some pits in the chrome and need to be restored. All original Mopar parts see pics for the...

For sale is a pair of 26” radiator side brackets that came off of a 66 B body 318 radiator number 2582944. The top holes have been slotted and has a couple extra holes drilled through them. Need a good cleaning but very solid and usable. Only numbers I see on them are 7 2 5. Asking $25 obo plus...

For sale is a pair of 2881606 wheel cylinder cores. They are both stamped with casting number 2881613. I have had these for years in dry storage. Being sold as cores. I tried to pull one of the original boots off but was very tight and I didn’t want to tear it so I left alone. I am not sure what...

For sale is some Holley choke parts that I removed from a Holley 4 barrel Mopar carb. I can’t remember what the list number was on the carb but was for a 68 model year. Has been in dry storage for many years. It all should be the same for Mopar factory Holley 4 barrels You get a the pieces in...

For sale is an Original Mopar 67 Dual snorkel air cleaner w/o CAP that came from a 1967 GTX. It has the correct 13 lines on the top and measures 18 inches across and 3 1/2 inches tall. Has the original smaller size 4 1/8 inch base.I have had this for many years and doesn’t look like I am ever...

For sale is a Strange engineering Mopar style aluminum master cylinder and mounting plate. I have had these for years and never used them. They are both brand new and the master cylinder has never had fluid in it. It has a 1.125 bore and is stamped Strange on the bottom and B3359T with date...

For sale is some Holley choke parts that I removed from a Holley 4 barrel Mopar carb. I can’t remember what the list number was on the carb but was for a 68 model year. Has been in dry storage for many years. It all should be the same for Mopar factory Holley 4 barrels You get a the pieces in...

For sale is a pair of 2881606 wheel cylinder cores. They are both stamped with casting number 2881613. I have had these for years in dry storage. Being sold as cores. I tried to pull one of the original boots off but was very tight and I didn’t want to tear it so I left alone. I am not sure what...

For sale is a pair of 66/67 383/440 big block valve covers. They are in good driver condition just need a little TLC on the wire separator bracket. They both have some dings but very small. These have been in my garage attic for many years. Asking $30 OBO plus shipping from 22630 or local...

For sale is a Strange engineering Mopar style aluminum master cylinder and mounting plate. I have had these for years and never used them. They are both brand new and the master cylinder has never had fluid in it. It has a 1.125 bore and is stamped Strange on the bottom and B3359T with date...

For sale is a pair of 66/67 383/440 big block valve covers. They are in good driver condition just need a little TLC on the wire separator bracket. They both have some dings but very small. These have been in my garage attic for many years. Asking $40 OBO plus shipping from 22630 or local...