Search results for query: *

I got this with a car, and cannot confirm if it is a new repop, or an original that was powder coated. I've had the car it came in for 20 years, and it was parked for 10 when I got it. Its been on the shelf, and when I went to use it, it did not fit my 440. Did they even make repop back then...

Very clean sway bar lower control arm. Has been blasted, lightly primed. Needs a bushing. Look at the finish of that pin and nut/washer. No pitting. $150 and shipping

I have 2 drivers side. One with the 66-67 style pin. Second group of 3 pictures. One with the 68-69 style. First 3 pictures. Straight, no sway bar tab. You can cut yours off your bent one. $50 each + shipping

Brand new Taylor 20' positive and 20" neg. with clips, strap, hold down and box. $120 plus shipping.

Brand new safety loop. Similar to summit's. All bolts and directions. $20 plus shipping

Blasted, no pitting. Clean arm ready for a bushing. Good bumper. Has the 66-67 style pin with cotter key provision. If you want a 68-69 style , I will swap it. Pin needs to come our to ship anyway. $125 paypal friends and shipping

I popped it apart to run through the ultrasonic cleaner. Shims all look good, clean and ready to lube up and use. Did not check rubber handle receivers. I have a good shifter mount plate 6348 also. Shifter $150 Mount plate with shifter, $40 Paypal friends Plus shipping. Med flat rate @19 will...

Good, clean, early B bellcrank, z-bar, torque shaft. Comes with retaining clip and early short boss pivot. Overall lenght is 9 1/4". Brewer's replacements are 9". If factory matters?, this one is nice. $60 plus shipping

I added an (s) to crossmember, so it doesn't come up in a search. My post for crossmembers for sale 66-69 is sold https://www.forbbodiesonly.com/moparforum/threads/transmission-crossmembers-66-69-71-72-and-73-74.300011/

Original 2225621 core for rebuild. Pistons come out. I cleaned the side looking for dates, found none. $250 including shipping in the US

My post has gotten lost in the search. Cleaning 40 years of bolts to help you put your car together. Upper control arm bolts. https://www.forbbodiesonly.com/moparforum/threads/upper-control-arm-adjuster-cam-bolts.300053/ $35 plus shipping

I'm cleaning 40 years of nut and bolts to finish putting my cars together. I have every bolt off a car, going through the sorting process. Never blasted, just walnut shell in the vibrator. Clean, rust free K member bolts, plus other bolts availible. Just ask. $25 a set plus shipping I have the...

40 years of parts. Straight front strut rods with nuts. I have other rust free suspenion hardware, just ask. $50 plus shipping

Cleaning and offering 40 years of of parts. I have flex plates. And almost any automatic related parts. As you can see from the stack, they are straight. All were checked on a flat plate, and they won't stack if they are bent. Large or small $20 each. No slant six by accident in the mix...

I'm cleaning and offering 40 years of small parts. Cam thrust plate with bolts. $40 Need a fuel pump eccentric with cone washer and bolt? Add $10 Plus shipping.

Getting hard to find for early cast iron water pump. 2 groove crank and water pump pulley. $75 and shipping

Clean, painted single groove crank pulley. For staggered bolt pattern balancer. I should add 383 to 340, 440. $35 + ship

I have many breathers for sale. All clean, rust free 70-74 single hose $20 71 only $45 75 up $20 Plus shipping. So any other small parts you need?

I have a rust free 2095059 pulley available. Yes, it has been through the rebuilders blast process, probably a coulpe times and the numbers are getting faint. But good shape otherwise. Asking $95 + shipping I have the 70 A/C style available also. And plenty of single groove ones to make your...

I have a wide selection of fan spacers, most with bolts. More bolts coming as I sort. $20 with bolts and washers, $15 if I can't find the correct bolts for the one you want. As always, more small parts available. Plus shipping of course.