Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Here is a good condition factory 383 4 barrel intake manifold. I checked the numbers and i read it is one of the best iron manifolds to have. I prefer aluminum so this one is up for sale. Would like $100 obo plus shipping.
The casting number is 2806301
Full set of clevite 77 main and rod bearings, Rod bearings have never been out of the package. Main bearings have been test fitted and a dial indicator used on them. But never installed with the crankshaft. The bearings are .010 undersized. I have no use for them as my bottom end was all...
I have a 741 case older 3rd member, it says 4.89 on the ring gear. Pretty sure its a 4.89 ratio, Its an open carrier. Ill get a picture up tomorrow. Should be a bolt in and go. Would prefer local pickup, but would discuss shipping. $120
I have 2 Thermoquads both are in good shape, but should have a kit installed to run properly. Both carbs move freely.
One says 9025S and i don't have the other number handy. One is off of a 1972 340 automatic car, and the other from a 1976 440. I remember from looking them up a while back.
$40 each
0.010 undersize bearings for a 440 engine. new never used. My crank cleaned up with just a polish and now i have no use for these bearings. there is a full set of main and rod bearings. Asking 120 for all plus the ride.