Search results for query: *

I have a used 1970+ LA engine heater hose bracket. The plastic coating is incredibly nice and it has some minor corrosion on the bracket. The condition of this bracket will be right at home in the engine compartment of a driver. $10 plus cost to mail. [

Single groove crankshaft pulley with an overall diameter of 6-1/8" and overall depth of 1-3/4". The bolt pattern is non symmetrical. There is some mild pitting inside but overall a very good piece. Price is $15 plus shipping

These hold down bars are specific to 361, 383 and 400 BB engines. They are too short for RB engines. They are in excellent condition. I removed remaining paint with emery cloth to expose the smooth surfaces. I am asking $20 plus shipping.

This is a really nice used Hurst Pistol Grip shift handle #7219. It is for 1970 only B-Body models without a console. It is not a reproduction. Description top to bottom: - Lens is excellent - Grip bezels have some minor pitting - Grips are excellent - Handle chrome has: - Sparse light...

I have a used set of HD or “Hemi” suspension rear leafs. The part numbers are 2539795 and 2539965. These are not reproduction. They are in good condition with some pitting. Price is $75 plus shipping.

I have a used set of HD or “Hemi” suspension rear leafs. The part numbers are 2539795 and 2539965. These are not reproduction. They are in good condition with some pitting. Price is $75 plus shipping.

I have a used original distribution block for a 1971-72 B-Body equipped with drum brakes. It needs cleaning and inspection. I am asking $20 plus shipping.

My apologies. Error.

I have a 1968-69 B-Body Hurst 4 speed shift mechanism for parts or rebuild. I learned that I could not use it after learning the reverse lever is #6353. I did not reassemble so condition is visible to part surfers. I am asking $50 plus shipping.

I have an orphaned alternator mounting bracket. I am told it fits only Mopar B Engines (383 and 400) 1969 and up with A/C. It is in very good condition but I would recommend a respray. I am asking $7.00 plus shipping.

I have a Carter Thermoquad for a 1974 440 HP CA (California) application. The model number is 9049S. This carburetor is extremely clean and does not appear to have any significant wear. The phenolic body is very nice. This carburetor is missing the idle solenoid and bracket as shown by the...

I have a brass Kelsey Hayes proportioning valve and metering block which I believe is correct for 1967-71 cars with front discs and rear drums. It needs a rebuild and it is all there. It appears someone media blasted the brackets at some point. I lightly brushed the brass so the stamped ID...

I modified, by milling for clearance, this Mopar 440 Six Barrel / Six Pack coil bracket to mount a coil onto my freshly built modified 440HP engine. I broke one of the studs and found a better way to mount the coil to the performance intake. Replace the stud and you are good to go. These cost...

I have a Holley 4160 for a BB Mopar. The carb number is LIST-4749-2 and the date code is 2942. I believe this is a replacement carb made in October of 1981. Someone scavenged parts from this carb, specifically the choke butterfly/linkage in addition to an idle mixture screw. I am selling this...

I have a 1973-1974 B-Body 400-440HP LH exhaust manifold. The casting number is 3751068 and the date code is 8/16/1973. This manufacturing date would indicate it was installed on a 1974 model. I examined it with a magnifying glass and I did not see any cracks. It is in very good condition and...

I have a new trunk floor fuel filler neck seal for a 1968, 1969 or 1970 Dodge Charger. The Chrysler part number is 2962189. I am asking $8 plus shipping.

I have a pair of used rear sway bar spring plates for a 1973-74 B-Body. The RH/LH Chrysler part numbers are 3845510/11. I media blasted them so I could evaluate their condition. The LH piece is very nice with minimal pitting. The RH piece is solid with some heavy pitting. I would consider...

I have a 6139S Thermoquad for a 1972 340 automatic. The carb is in overall good condition and complete. The primary and secondary throttle shaft bores need to be checked. I am asking $125 plus shipping.

I purchased these Walker aftermarket tail pipes long ago with the intent of using them on my 1972 Charger. This is a set of 2-1/4" LH and RH tail pipes. These fit 1971-1974 B-Body models equipped with a V8 and dual exhaust. I am asking $50 plus shipping for the pair.

I have a new aftermarket Carter mechanical fuel pump for 1969, 1970 and 1971 model 383 and 440 standard engines. This fuel pump is not correct for 440 HP engines. The inlet (5/16" OD) and outlet (5/16" OD) locations are 180 degrees opposite one another. Please check your application before...