Search results for query: *

Anyone used one of these? Happy with it? Difficulty of installation? http://www.jegs.com/i/B-M/130/46076K/10002/-1?parentProductId=751616 Tell about it. Thanks, Joe

Looking at some of these for the back end of my car either 28 x 10.5 - 15 or 28 x 12.5 - 15 on a 8.5 rim. Now the ad says Inner Tubes recommended. Really ? Do you guys run inner tubes in your rear tires ? Not sure what air pressure I would use, will do a burn out once in a while , but...

Can someone tell me if there is an adjustment between the master cylinder and the power booster for adjusting the length of the push rod? Also is there anything to watch out for in unbolting the master cylinder from the power booster that would be under pressure by way of springs or something...

Can you bleed the brakes on a car with a booster with the engine off, or does it have to be running? :edgy: O k that's it for me.................enjoy the rest of your week end. :grin: Thanks, Joe

The car that I bought (64 Dodge 440) on the pump has what I'd call the return line ( barbed nipple ) looks to be around 3/8". On the end of the steering box where it connects to the barbed end looks to be 5/8". Now I've been looking for the hose but the previous owner must have discarded it...

I believe the front disc set up on the front of my 64 is from a 73 dart. In doing the brake lines last week I felt the hoses that the previous owner had bought were to short. Went to a couple supply houses around here and had no luck in coming up with anything. I called a place called Classic...