Search results for query: *

So i get off work today to find this... for no reason.

Anybody know where i can find an aftermarket shifter cable for a bigblock 727 on my 65' chrysler 300?

Leaving the parking lot(slick asphalt) from work today in my cordoba. Driving maybe 10 mph and when i hit the brakes the driver rear tire locks up leaving a visible skid mark. Limp her home with a hard pedal and pull off the opposite side drum. When the pedal is depressed one side of the wheel...

Bb 400 motor. Driven occasionally since i brought her back from washington a year ago. First time diving into this one. Probably the first time this timing cover has been off since 1972. Changed the oil less than 1000 miles ago. Any other thoughts before i pull these heads?

Hey guys so recently my 360-3 has been making some bottom end noise on start up. A slight tapping noise coming from the bottom of the motor. Ive heard plenty of rod knock, piston slap, worn main/ cr bearing noise. Ive heard rod knock go away and come back off and on, but in this case it only...

About 9 months ago i pulled a 360-3 from a motorhome and put the short block in my cordoba. Kept the old heads, oil pick up, oil pan, intake etc... Motor runs fine ive probably put 15k miles on it since. Just one thing, every time i run it around and let it sit for 10-30 min on a hot day in...

Service manuals for my 78' doba and an old school dwell meter. $15 for the lot. Also found a black n white pic inside of someones new cordoba.

So im visiting my first love in storage today a 65 chrysler 300. I put a new o ring on the shifter cable but i cant seem to adjust it right. This car is far from a show car. It would never shift all the way into 1st gear. I pulled the cable all the way out, with the shifter in 2nd and turned the...

So today instead of my brake lights coming on every time i hit the brakes one interior light comes on.. No brakelights. Any thoughts?

Pulled off my diff cover today to change the oil and found this.. No metal flakes just alot of bubbles almost looked milky. Car had been sitting for an hour before i did it. Is this just old broke down oil?

A good buddy of mine is getting out of the army and wants to take out a business loan to buy a rust removal laser machine. Apparently it removes paint and rust without harming the metal at all. After painstakingly sanding cars like this one(all of which but the wheel wells were done without an...