Search results for query: *

Hoping to find someone near Los Angeles who wants to make a few bucks installing my door and 1/4 windows. Had a glass guy but he won’t do doors. I’d do it myself, but I’ve got 4 kids five and under and just don’t have the time. It’s one of the last needs I have.

Anyone know what gasket or tape is needed for the front and back windshield installation on a 73 Roadrunner? I'm trying to gather everything to finish my car and can't find any listed standard.

Has anyone built a body cart/dolly to transport their 3rd gen b-body without the suspension? I am attempting to do this this weekend, out of wood, and would love any plans that folks might have. I want to be able to take it to my body guy, to the paint guy, etc. without having the fresh...

What sheet metal will interchange, if any, between a 71-72 roadrunner and a 73-74 roadrunner? I read that the hoods will swap...if that true? What about doors?

Is anyone running the Edelbrock shocks on their 73-74? I was told that they would fit our car, but when I got them today and compared them with the KYB's they are much larger and longer. They are the 33840 Performer IAS shocks. Was hoping to install them this weekend, but as it looks, I think I...

Hey guys...finally got the new k installed today. However, I had a small problem...the new k-frame appears to be from a 71-72 and the sway bar I ordered doesn't seem like it's going to work...it is the k-frame that has the integrated eyes on the k-frame... Does anyone know if the sway bar...

Looking for your opinion on whether to keep or not to keep the rear iso clamp setup on my 73 Sattel-runner. I know that Firm Feel has an elimination kit, not sure what other options there are if I do decide to go with the elimination.

Hey Guys...I have a question on setting up my leaf springs on my 73 Satellrunner...specifically, will the following setup work and is it alright for street use? My goal is to raise the rear 1-2 inches. I am swapping in a 72 8 3/4 rear. I want to run the super stock springs from 72 with the...

Hey guys... Have a couple of fuel system questions was hoping could get some advice on. 1. I need a new fuel sender unit for my 73 Clone Runner. It currently has a 318, but I will be swapping in a 360 at some point, which is planned to run about 425/430 hp. Do I need to upgrade to the 3/8...

Hey guys... I am looking at getting some sway bars for my Road Runner clone...wanted to see if anyone had thoughts on what to get. I am debating between the PST and Firm Feel setups...The Firm Feel is about three times the price. Is there that big of a difference? On the rear, I am...

Hey all... So the next week is my week to finish my disastrous front end rebuild...I was wondering if anyone could tell me what parts can be reassembled on the K-Frame before I reattach it to the car? It's a 73 Runner.

Does anyone know of any available aftermarket LCA replacements for a 73 Plymouth B-Body? I made a big mistake, pressed out the ball joint, which was threaded...need to replace the LCAs now I think...

Hey guys...I'm starting the rebuild on the front suspension. Have a couple of questions. First on the LCAs. Can anyone confirm that the ball joints are press in? I know they pressed out, so I assume they're press in. Second. How do I remove the cross shaft on the upper control arms? I...

Does anyone happen to know the correct shock bushing size for KYB GR2 Front Shocks?

Hey guys...I'm looking for the linkage bushings for my 73 Satellite with a 727 column shift...somehow the DPO (Dreaded Previous Owner) found a way to foul them up and now it doesn't shift into gear correctly. Anyone know what they are called or where I can find a kit?

Hey guys... Just digging into the front suspension on my 73 satellite/rr clone. I picked up some new spindles, which I blasted today to get clean...I covered up the spindle face, but I failed to cover the smooth surfaces on the arms and back of the spindles (see photos)... My question is...

Hey guys...I'm finally getting to rebuilding the front end of my 73 roadrunner clone...I'm ready to order a front end rebuild kit and wanted opinions...should I go with the PST Super Poly Kit or the Firm Feel HP Kit...the Firm Feel kit is about $100 more...both are urethane kits. Is the Firm...

Hey guys...got some suspension questions. First project on my 73 Satellite/Roadrunner clone is rebuilding the front end, it's toast (includes k-member replacement). My question is, I am planning on this car being a daily driver, putting down between 450-550 hp and I want to make sure that when...

Hey guys... When I picked up my new k-frame for my '73 Sat/Road Runner Clone, the guy at the yard was suggesting doing a rear end swap to a 70-72 style 8 3/4 rear. He mentioned it would require removing some the isolator (one year only option on the 73) and some other bits, but didn't catch...

Hey all...new mopar guy here...just picked up a '73 Satellite...going to be my first mopar project - totally psyched! So the dreaded previous owner failed to lube the front chassis and had some jack as# tow it after the spindles failed and the tow company broke the welds on the k-member. I...