Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Would anyone know of a good shop or have the ability to match existing paint? I can't match my car with any 1967 factory paints. It's like a mix between turbine bronze and medium bronze.
I'm installing a fiberglass hoodscoop on my 67 Coronet and wanted to know if there was a trick for fitting it well to the hood. It doesn't seem to sit flush enough for my liking.
The doors on my 67 RT do not appear to be aligned properly. The drivers side being worse. The bottom gap between the door and rocler goes from thin to large and the bottom rear of the door seems to be sticking out too much. You can see the body lines dont really line up and it drives me insane...
Is there a way to access the back side of the front fenders without removing them. I want to install hemi badges and once I drill the holes I'll need to bolt them down. Any tricks?
Could someone measure the location of the 426 HEMI badges on the front fender for a 1967 Coronet? I would really appreciate it. The measurement form the top of the fender and to the door gap.
Thanks.
67 R/T
Both doors kind of stick out at the bottom towards the rear - I would say Close to an 1/8th of an inch. Door hinges seem tight is there an adjustment for this?