chebe
New Member
These are a pair of DRUM brake spindles that are used on slant 6 A-Body Duster, Dart, Demon, Valiant, Scamp from 1973 to 1976 as well as 1970 to 1974 E-Body car and any 1962-1972 B-Body car.
I purchased these Spindles from a ForABodiesOnly user last month(October) for a Wilwood disc brake conversion on my 69 Barracuda. These spindles do not work the Wilwood kit I have. See below for details:
Casting #3402738. Spindles have the same overall height with last three on casting being N118 & N124.
Spindles come with new bearings, rear seal, nuts and bolts. Entire assemblies were previously cleaned in a solvent tank then soaked in Evaporust to remove surface rust. They are still spotless and ready to install unless paint or powder coat is desired.
Asking what I paid, $130.00 + Freight. I am open to reasonable offers.
I purchased these Spindles from a ForABodiesOnly user last month(October) for a Wilwood disc brake conversion on my 69 Barracuda. These spindles do not work the Wilwood kit I have. See below for details:
Casting #3402738. Spindles have the same overall height with last three on casting being N118 & N124.
Spindles come with new bearings, rear seal, nuts and bolts. Entire assemblies were previously cleaned in a solvent tank then soaked in Evaporust to remove surface rust. They are still spotless and ready to install unless paint or powder coat is desired.
Asking what I paid, $130.00 + Freight. I am open to reasonable offers.
Last edited:
