11" brake drums

[V8Manu]

Hi guys

i need new 11" front brake drums for my 63' Polara, the brake shoes are 3" wide. I can't find them here in Europe. Can you help? PN me please.

Thanks.

Manu

 

[Photon440]

They might be part of this list of obsolete brake parts:
http://www.atlaschrys.com/Late/Brakes/LateBrakeDrums.html

 

[V8Manu]

Thanks, i have send a request.

 

[cr8crshr]

Well...I have some good news for you. I have, 3 11X3 drums. The deal is...That they are set up to work on the rear axle. That being said, you actually can take the front bearing hubs off your current front set and then have a machine shop press the bearing hubs onto the 11X3 drums. The size/diameter of the hole in the drum is the same for both front and rear drums. They are over at my Brothers shop so tomorrow I will get some pics up of them and explain exactly what I am talking about. It is not that difficult at all. There is plenty of material left to have the drums turned. I will clean them up for shipment as they have been out of doors but under protection. Mostly surface corrosion/light rust due to the exposure to atmosphere. They came off of 2 1966 Chrysler 300's where one was converted to 4 wheel disc and the other has been sold. I will take $40.00 for each drum you would need. The shipping will be pricey as it usually is to Europe but I have extensive experience in setting up shipments to clear customs and any tariffs required. Let me know if interested. I have a good reputation on this Board for good quality used parts. I await your reply...cr8crshr/Tuck

 

[boltupal]

I,m pretty sure I have a used set from a 64 full sized Chrysler. But will cost a ton to ship.

 

[cr8crshr]

Here are some pics....These will clean up nicely. Let me if you are interested or not...cr8crshr/Tuck