- Local time
 - 11:48 PM
 
- Joined
 - Dec 23, 2009
 
- Messages
 - 4,115
 
- Reaction score
 - 5,205
 
- Location
 - Rancho Cordova, CA
 
		
			
	
		
		
	Contact seller
			
				
			
			
				
					
	
		
			
		
		
	
			 
			
				
			
		 
		
			
	
		
		
			
	
		
	
								
								
									
	
	
		Since i am selling off my collection of Carter AFB carburetors, i my as well put this intake and carburetors, linkage, up for sale, also.
Ok, here's what i have.
Factory cast iron dual quad intake manifold from a 1958 350 engine.
Cast number 1827899-1 And a date code of J 24 7 (October 24, 1957)
Yes it will fit a 383, and 361 engine.
And the carburetors on it are.
Carter AFB 2787S A09 Date Code, which is a 1959 carburetor.
Carter AFB 3105S A 1961 carburetor.
And i have 426 hemi linkage between the front and rear carburetor, connecting them both.
Fuel line is home made, bent to fit.
I will sell everything At $750.00 dollars, plus whatever the shipping will cost, to your zip code, in the city that you live.
This equipment will be sold "AS IS" condition, as i personally never put this set up, to use in my decades of ownership.
I took the carbs apart, soaked them out, put everything back together.
Yes, they have been sitting on the storage shelving for years and years.
As for payment i will accept Pay Pal, a good old fashioned postal money order, or a cashiers check from your bank.
ANY questions, do it with sending me a pm, through this forum and i will get right back with you.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Thank's a lot.
Jim V.
hemi71x
		
		
	
	
		
	
		
	
		
	
		
	
		
	
		
	
		
	
		
	
		
	
	
		
			
		
		
	
				
			Ok, here's what i have.
Factory cast iron dual quad intake manifold from a 1958 350 engine.
Cast number 1827899-1 And a date code of J 24 7 (October 24, 1957)
Yes it will fit a 383, and 361 engine.
And the carburetors on it are.
Carter AFB 2787S A09 Date Code, which is a 1959 carburetor.
Carter AFB 3105S A 1961 carburetor.
And i have 426 hemi linkage between the front and rear carburetor, connecting them both.
Fuel line is home made, bent to fit.
I will sell everything At $750.00 dollars, plus whatever the shipping will cost, to your zip code, in the city that you live.
This equipment will be sold "AS IS" condition, as i personally never put this set up, to use in my decades of ownership.
I took the carbs apart, soaked them out, put everything back together.
Yes, they have been sitting on the storage shelving for years and years.
As for payment i will accept Pay Pal, a good old fashioned postal money order, or a cashiers check from your bank.
ANY questions, do it with sending me a pm, through this forum and i will get right back with you.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Thank's a lot.
Jim V.
hemi71x
			
				Last edited: 
			
		
	
								
								
									
	
		
			
		
		
	
	
	
		
			
		
		
	
								
							
							
				














