WTB 1966 0r 67 Charger A/C interior parts and dash parts

[Kevin deGraauw]

I am looking for the interior parts to convert a 1967 Charger to Factory A/C and will need:
the dash frame and vents from an A/C car,
uncut bezel
buttons and controls- non-EL lighting is ok (going into a 67)
evaporator and plenum box
ducting and hoses etc
vacuum lines etc
outside hard lines (liquid line running to firewall from drier)
heater valve- core is ok
IDEALLY, a cutout of the firewall from a long rotted A/C car to use as a template, but not necessary

Long time member of A bodies and C bodies only, but first time poster of B bodies only.

Thanks in advance for looking!

 

[aeon280]

Curious as to why you don't just go with an off the shelf system like Classic auto air or Vintage auto air offer? By the time you piece everything together to go with the factory system you will probably spend twice as much as one of these systems that come complete and eliminate a ton of hassle of piecing a system together.

 

[Kevin deGraauw]

Yeah I know, and I have installed a half dozen of those to much success on everything from Mustangs to Road Runners.

I just prefer the factory pushbutton controls and the "truly" factory" look going into a show car. Besides, while the evaporator module is fairly complete and thought out, the Vintage/CAA kits fall a little short with their "hang on" vents and their "'32 T-bucket" looking control panels- non-mopar for sure. The vents are in a nicer "built-in" location on these Chargers which just makes better sense to me.

I am planning to build up a lot of factory options on this car, and seeing a few people on here needing NON-AC stuff (which I will have all of it soon!) maybe a trade can work out. Any one out there with anything, I am all ears!